772060
43
Zoom out
Zoom in
Previous page
1/52
Next page
EN 19
Power limiter
Setting the power limiter should only be carried out by a registered and qualified
installer. Please read the safety regulations and the installation instructions
carefully.
The hob is equipped with a power limiter. If the total power of operating cooking zones exceeds
the maximum available amount of power, the power is automatically reduced. The display of the
cooking zone who is being reduced in its power is first flashing; the level is then automatically
reduced to the highest available power.
The limiter is set at 7400W by the factory, but it is possible to change it (see table).
Position of the slide control Setting of the power limiter
0 - 8 7400 W (total)
11000 W (total)
21500 W (total)
32800 W (total)
43500 W (total)
53700 W (total)
64500 W (total)
76000 W (total)
1. Connect the hob to the power supply.
2. Within two minutes, touch the lock key and the pause key simultaneously until you hear an
audio signal.
You have entered the Service Menu.
3. Touch the two illuminated slider cursors until you hear a second audio signal.
The timer display shows ‘CF6’.
4. Touch the pause key.
The timer display shows ‘PHA’.
A cooking zone display shows the power level.
5. Use the slide control to select the desired power level.
6. Again, touch the lock key and the pause key simultaneously to confirm the setting.
The hob switches off.
To exit the Service Menu without making any changes, touch the on/off key.
POWER LIMITER
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IK5064F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IK5064F in the language / languages: English, Dutch as an attachment in your email.

The manual is 1.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IK5064F

Pelgrim IK5064F Installation Guide - English - 2 pages

Pelgrim IK5064F User Manual - German - 52 pages

Pelgrim IK5064F Installation Guide - German, Dutch - 2 pages

Pelgrim IK5064F User Manual - French - 52 pages

Pelgrim IK5064F Installation Guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info