692038
24
Zoom out
Zoom in
Previous page
1/68
Next page
EN 8
Switching on and power setting
The power can be set to 9 different levels. The hob also has a 'boost' setting which is indicated
by a 'P' on the display (see 'Boost'). The front left cooking zone has a 'Power Boost' (SP).
1. Place the pan in the middle of a cooking zone.
2. Press the On/Off button.
You will hear a single beep and a '0' will appear in the display
next to each cooking zone. If you don't do anything else, the cooking zone will switch off
automatically after 10 seconds.
3. Press the on/off button for the cooking zone concerned.
4. The '0' next to the selected cooking zone will light up clearly.
5. Using the – and + buttons select the preferred power level. When you select the – button
directly, the cooking zone will be switched on at power level 9.
The set power is visible in the display.
Please note
All 4 zones cannot be set to level 9 (or P) at the same time if the appliance is connected to 1
phase. The 4 zones can be set to a maximum level 7 at the same time.
Another zone needs to be reduced or switched off if a higher level is desired. The appliance
will beep and the set power level in the display will start to flash. You should then set the
zones to a lower level!
Switching off
Switching off one cooking zone
One cooking zone is switched on. The display shows a power level between 1 and 9,
or "P".
1. Press the button for the cooking zone to be switched off. Set the cooking zone to '0' with
the – button.
The cooking zone switches off. The hob switches off after 20 seconds, if all cooking
zones are set to '0' and no other process is being used.
Switching off all cooking zones
Several cooking zones are active.
1. Press the On/Off button to switch off all cooking zones.
You will hear a beep. All displays are off. The hob is switched off.
OPERATION
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IK2084F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IK2084F in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IK2084F

Pelgrim IK2084F Installation Guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info