692033
32
Zoom out
Zoom in
Previous page
1/92
Next page
EN 10
Pan detection
If the hob does not detect a (ferrous) pan after the cooking power has been set, the pan
detection symbol and the selected power setting will flash alternately in the display and the hob
will remain cold. If a (ferrous) pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off (see also chapter ‘Pans’).
Indications in the display
In display
Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active
No (suitable) pan on cooking zone (pan detection symbol)
Child lock function selected
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
Pause function selected
Fault code; See ‘Troubleshooting table’
Cooking-timer/alarm
A cooking-timer can be set for each active cooking zone.
The hob also has an alarm. Both the cooking-timer as well as the alarm can be set for a
maximum of 99 minutes.
The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone.
If the alarm has been set, it will continue counting down after the hob has been switched off.
The alarm can only be switched off when the hob is switched on.
Select the desired function:
Cooking-timer — the timer is linked to a active cooking zone. After the set time has
elapsed, the cooking zone will switch off automatically.
Alarm — the alarm only beeps after the set time has elapsed.
USE
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IK0084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IK0084 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IK0084

Pelgrim IK0084 Installation Guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info