772113
61
Zoom out
Zoom in
Previous page
1/80
Next page
EN 23
OPERATING THE INDUCTION HOB
Switching on a cooking zone
Before activating a cooking zone, place a suitable pan on the relative
cooking circumference.
On turning any knob clockwise, a beep is emitted and all the
displays switch on; the one corresponding to the turned knob will
show the selected power value, while the others will show the value
zero ‘0’.
On turning a second knob, no beep is emitted and the display
shows the power value set for that knob.
Changing the power level
The heating power of the cooking zones is increased by turning any
knob clockwise from “0” position, and is decreased by turning the
knob anticlockwise from the position reached. A power level can
be set between setting “0” and “9”. There is also a “Boost” setting
available.
The display shows the chosen power level.
The knob’s default position corresponds to level “0” (value display).
1. Turn the knob to set the desired power level (see “Cooking
settings”).
The display shows the chosen level.
2. Turn the knob clockwise beyond power level “9” to select the
“Boost” setting.
An audible signal will be sound and the display shows “P”.
3. Then reposition the knob on level “9”.
Switching Off manually
Turn all the knobs to zero ‘0’ position. Each display will show a
flashing dot and a zero ‘0’. After 15 seconds all the displays will
switch Off, a beep will be emitted and the appliance with go to
stand-by.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IF960 RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IF960 RVS in the language / languages: English, Dutch as an attachment in your email.

The manual is 11.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info