772113

Pelgrim IF960 RVS Manual

50
Zoom out
Zoom in
Previous page
1/80
Next page
EN 12
Pan recognition
• An electronic sensor detects if a pan is present or absent on the
cooking zone. If the type of pan is unsuitable for magnetic induction
cooking or if the pan is too small (see Minimum pan diameter), the
adjacent pan detection symbol is displayed.
• If during cooking a pan is removed from the cooking zone without
having first returned the relative knob to “0” position, the power
value, previously set and shown on the relative display, will be
automatically replaced with the symbol.
• If the pan is repositioned correctly on the cooking zone, the pan
detection symbol switches Off and cooking will resume normally;
otherwise, after 10 minutes, the symbol will switch Off, the knob
will have to be returned to “0” position and a new power value set
before the cooking zone can be used again.
• If a knob is turned to any position before placing a pan on the
cooking zone, the relative display shows the set power value and
then immediately replaces it with the pan detection symbol (the
cooking zone stands by for 10 minutes). If in the meantime a pan is
placed correctly on the cooking zone, cooking will begin; otherwise
the cooking zone does not activate and the pan detection symbol
switches Off. To reactivate the cooking zone, the relative knob must
be returned to “0” position and a new power value set.
Power distribution
• The maximum applicable power is distributed among the active
cooking zones.
• The first power level set takes priority over the next settings on
the other zones. On activating the last cooking zones, the values
on the displays will start to flash and a double beep will sound,
automatically showing the highest power level supplied.
• If the power setting of any of the cooking zones is manually
reduced, the difference in power will be redistributed among the
remaining cooking zones.
• Power is distributed automatically among the left cooking zones
and the middle and right cooking zones.
USE
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IF960 RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IF960 RVS in the language / languages: English, Dutch as an attachment in your email.

The manual is 11.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info