482596
71
Zoom out
Zoom in
Previous page
1/74
Next page
71
7 Installation Instructions
7.3 Building in
Check that the cabinet and the cut-out meet the dimension
and ventilation requirement
Threat the sawn ends of wooden or synthetic worktops with
sealing varnish if necessary, to prevent moisture causing the
worktop to swell.
Lay the hob upside down on the worktop.
Fit the connecting cable to the appliance in compliance with
requirements (see page 69 and 70).
Remove the protective layer from the sealing tape and apply
the tape in the groove of the aluminium profi le or on the edge
of the glass plate. Do not stick tape round the corners, but cut
4 separate pieces to seal the corners well.
Turn the hob over and lay it in the recess.
Connect the appliance to the mains. A short bleep will be
heard and all the displays will light up briefl y. The appliance is
ready for use.
Check that it works properly. If the appliance has been wrongly
connected either a bleep will sound or nothing will appear in
the displays, depending on the error.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK884 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK884 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info