557151
27
Zoom out
Zoom in
Previous page
1/82
Next page
EN 7
Settings
Switching on the hob and setting the power
The power has 9 settings. There is also a ‘boost’ setting, which is
indicated by a ‘P.’ in the display (see ‘Boost’).
1. Put a pan on a cooking zone.
2. Touch the On/Off button. You will hear a short bleep and the
display for each cooking zone will show ‘0.’. The red light to the
right above the On/Off button is constantly illuminated. If no further
action is taken, the cooking zone will automatically switch off after
10 seconds.
3. Use the button + or the - button in the desired cooking zone to
choose the correct setting. The hob will automatically start in the
chosen setting (if it detects a pan).
4. Touching the + button for the first time displays setting ‘4.’.
5. Touching the - button for the first time displays setting ‘9.’.
Tip
You can touch and hold the - or the + button to set the desired power
faster.
Pan detection; If the hob does not detect a (ferrous) pan after the
cooking power has been set, the pan detection symbol and the
selected power setting will flash alternately on the display and the
hob will remain cold. If a (ferrous) pan is not placed on the cooking
zone within 1 minute, the cooking zone will automatically switch off
(see ‘Pans’).
Residual warmth indicator; A cooking zone that has been used
intensively will retain heat for several minutes after it has been
switched off. An ‘H.’ appears in the display as long as the cooking
zone is hot.
Automatic heat-up function
The automatic heat-up function temporarily increases the power
(setting ‘9.’) to heat the contents of the pan faster. This function is
available in all settings except the ‘Boost’ setting and setting ‘9.’.
OPERATION
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK795 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK795 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IDK795

Pelgrim IDK795 Installation Guide - English, German - 2 pages

Pelgrim IDK795 Additional guide - Dutch - 1 pages

Pelgrim IDK795 Installation Guide - Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info