557155
24
Zoom out
Zoom in
Previous page
1/67
Next page
EN 8
Pan detection
If the hob does not detect a (ferrous) pan after the cooking power has
been set, the pan detection symbol and the selected power setting will
flash alternately in the display and the hob will remain cold. If a (ferrous)
pan is not placed on the cooking zone within 1 minute, the cook
ing
zone will automatically switch off (see also ‘Pans’).
Residual warmth indicator
A cooking zone that has been used intensively will retain heat for
several minutes after it has been switched off. An ‘H.’ appears in the
display as long as the cooking zone is hot.
Boost
The ‘Boost’ function is used to cook at maximum power for a short
period of time (maximum 10 minutes). The power is reduced to setting 9
at the end of the maximum boost time.
Boost function is not available in bridge mode!
Switching on the boost function
The hob is switched on and a pan is on a cooking zone.
Touch and slide your finger (to the right) over the multi slider of the
desired cooking zone to choose the boost setting. (You can also
use the multi slider if the power has already been set).
The display shows ‘P.’. The boost function is immediately active.
Switching off the boost function
The boost function is switched on, the display shows ‘P.’.
Touch and slide your finger (to the left) over the multi slider of the
desired cooking zone to set a lower level.
Or:
Directly select a lower setting by touching the left side of the multi
slider of the desired cooking zone.
Automatic heat-up function
The automatic heat-up function temporarily increases the power
(setting ‘9.’) to heat the contents of the pan. This function is available in
settings 1-8.
OPERATION
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK762 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IDK762

Pelgrim IDK762 Installation Guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info