482597
49
Zoom out
Zoom in
Previous page
1/65
Next page
GB 17
If one of the cooking zones is set to boost and you want to set the
other zone to setting 9 or Boost, the cooking zone that is set to
boost will automatically be switched to a lower setting.
T
wo cooking zones that are beside each other do not influence
each other. You can set both cooking zones to Boost.
Bridge mode
The bridge mode can be activated by pressing the bridge button. Both
zones on the front and rear will have the same settings after activating
this function (they are now connected). The displays and keys of the
section of the most rear zones will not work. Changing the settings is
only possible with the multi slider of the zones in the front. When the
timer is active, the timer indicators in the timer display will illuminate for
both bridged zones at the same time.
Use a (fish) pan where at least one of the centre/middle positions of the
zones is covered.
Activating the bridge mode
• Put a pan (or two/three pans) on the cooking zones that you want
to set to the bridge mode.
Touch the On/Off button.
You will hear a short bleep and the display for each cooking zone
will show ‘0.’. If no further action is taken, the hob automatically
switches off after 10 seconds.
Press the bridge button on the left or on the right.
The bridge indicator will illuminated and you will see a bridge
symbol in the display.
Touch and slide your finger over the multi slider of the bridged
cooking zone to choose the correct setting. The hob will
automatically start in the chosen setting (if it detects a pan).
You can link the bridged zone to a timer; in this case you will
also see a timer symbol in the display.
Deactivating the bridge mode
Press the bridge button on the left or on the right again.
The bridge indicator and the bridge symbol in the display will
disappear. The cooking zones are set to ‘0’.
OPERATION
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK694 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK694 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IDK694

Pelgrim IDK694 User Manual - German, French - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info