71735

Pelgrim IDK 641 Manual

46
Zoom out
Zoom in
Previous page
1/54
Next page
Extra safety
Safety hob
n A sensor continuously measures the
temperature of certain parts of the hob. In
case of temperatures rising too high, the
power is reduced automatically.
n As soon as you remove the pan from the
hob, the cooking zone automatically stops.
Accustom yourself to stop the cooking
zone or hob manually to avoid unintended
switching on of the induction hob.
Safety pans
Every cooking zone is equipped with a sensor
that measures the temperature of the bottom
of the pan to avoid any risk of overheating
when a pan boils dry.
Safety metal parts
Small objects such as very small pans (less
than 12 cm or less than 10 cm in the
16 cm zone), forks or spoons are not detected
as pans by the hob. The display of the cooking
setting continues to flash and the zone will
not switch on.
Overheating protection
The appliance may become overheated if:
n the pan does not conduct the heat
adequately;
n fat or oil is heated at a high setting;
n there is insufficient circulation of air
(see also ventilation protection in the
installation part of this manual).
In the event of overheating the result will
be that the cooking zone in question or all
the cooking zones will display one of the
following reactions:
n the hob will reduce the power supplied
slightly (this is not visible in the cooking
settings in the displays);
n if this does not help, the hob switch off
and a series of dashes will appear in the
displays.
As soon as the cooking zone(s) has/have
cooled down sufficiently, the dashes
disappear and the cooking zones remain
switched off.
Prevent the overheating protection becoming
activated by:
n using pans that are good conductors of
heat;
n heating up fat or oil at a lower setting;
n making sure there is sufficient ventilation.
If, despite the above-mentioned measures
having been taken, the overheating protection
becomes activated again, contact the service
department or a professionally qualified
specialist.
90
91
USE
USE
Cooking-time limiter table
Childproof lock
Your induction hob is equipped with a
childproof lock that lets you lock the
appliance:
n When the hob is switched off (for cleaning
the appliance or to prevent unintended
switching on by children);
n or during cooking (the zones stay in
operation and the level you have set in the
displays will not change).
If the childproof lock is switched on during
cooking, the on/off keys
still work for
safety reasons. Don’t forget to unlock the
keypad before using it again.
Switch on childproof lock
Press on the lock button
(+/- 5 seconds)
until the lamp above the button lights up and
you hear a beep signal.
Locked cooking zone in operation
On the display the symbol
and the capacity
being used by the cooking zone concerned
are shown alternately. When you use a button
from the cooking zone that is switched on, the
lamp above the lock button will burn for a few
seconds. For safety reasons you can still turn
off the cooking zone using the on/off button
.
When you use a button for a cooking zone
that is not switched on, the symbol
is
displayed and the lamp above the
lock key will come on for a few seconds.
Switch off childproof lock
Press the lock button
(+/ 5 seconds) until
the lamp above the button goes out. You hear
a double beep signal.
Clean Lock function
If all zones are disabled, you can use the
childproof lock key briefly to block all zones
for 1 minute. During this time, the zones
cannot be activated. This is convenient for
cleaning the hob for example.
Beep signal
You can switch the beep signal for the “+”
and “-“ buttons on and off. Switch the beep
signal off by setting the front left hand zone
(IDK826-right hand zone) on and off and then
pressing both “-“ buttons of the left zones
(IDK826-right zones) within 3 seconds. The
beep signal can be switched on again by
repeating this process.
Position
IDK641
Time
(hours)
1 10
2 5
3 5
4 4
5 4
6 3
7 3
8 2
9 2
P 1
Position
IDK826
Time
(hours)
1 10
2 5
3 5
4 4
5 4
6 3
7 3
8 2
9 2
10 1
11 1
P 1
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IDK 641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IDK 641 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info