133008

Pelgrim gwa 810 Manual

22
Zoom out
Zoom in
Previous page
1/23
Next page
40
Attention! Turn the mains voltage off during cleaning and maintenance by
unplugging the plug from the socket or by switching off the circuit-breaker in the
meter cupboard.
4.1 Cleaning
The exhaust hood can be cleaned with soapy water and a soft cloth, then rinse with clean
water. Do not apply aggressive cleaning agents such as soda. The paintwork on the
exhaust hood will remain shiny when it is periodically rubbed with wax.
4.2 Cleaning and replacing the grease filters
Open the lock on the filters and remove the filters.
Attention! Clean the grease filters each
month with soapy water. When washed
in a dishwasher, the grease filter may
discolour slightly. This is normal and
does not affect its filtering capacity.
4.3. Changing the carbon filters
The saturation of the filter depends on the intensity of use. The carbon filter needs to be
replaced at least every four months.
Attention! The carbon filter cannot be
washed for reuse. Saturated carbon is not
environmentally friendly, change the filter
regularly.
4.4 Removing and fitting the door
Open the door and push the brackets onto the side of the door.
Pull the door out of the conduit. Place the panel door on the exhaust hood again. First the
top and then the bottom.
41
4 Maintenance
3.4 Fitting the panel door
Open the door, push the brackets in and remove the door. 1.
Place the panel door with the back up on a flat surface.2.
Put the drilling jig (N3) on the back of the panel door. The arrow of the jig should point 3.
upwards.
Drill mounting holes of between (K) 2.5 mm to 6 mm deep.4.
Attach the metal panel with the enclosed 8 screws.5.
Fit the door, including panel, onto the exhaust hood. First the top and then the 6.
bottom.
Check whether the door opens and shuts properly.7.
3 Installation
2x
… 22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim gwa 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim gwa 810 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info