482589

Pelgrim GVW5820NY Manual

24
Zoom out
Zoom in
Previous page
1/76
Next page
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Delay start button
Press this button again and again to delay
the start of the washing programme of 3, 6
or 9 hours. The related indicator comes on.
Function buttons
With these buttons you can:
• Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
• Cancel a washing programme in opera-
tion. Refer to 'Setting and starting a
washing programme'.
• Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to ‘What to do if...’.
• Activate and deactivate the acoustic sig-
nals. Refer to 'Acoustic signals'.
Setting mode
The appliance must be in setting mode
for these operations:
• To set and start a washing programme.
• To set and start a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
• To deactivate or activate the acoustic
signals.
Activate the appliance. The appliance
is in setting mode when:
• All the programme indicators are on.
Activate the appliance. The appliance
is not in setting mode when:
• Only one programme indicator is on.
• The delay start indicators are on.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Setting
and starting a washing programme'.
Acoustic signals
You can hear the acoustic signals in these
conditions:
• The washing programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold function button (B) and
function button (C) at the same time un-
til the indicators of function buttons (A),
(B) and (C) flash.
3. Release function button (B) and function
button (C).
4. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C)
continues to flash.
• The end indicator comes on.
5. Press function button (C) again.
• The end indicator goes off. The
acoustic signals are deactivated.
6. Deactivate the appliance to confirm.
To activate the acoustic signals again, do
steps (1) through (4). Press function button
(C), the end indicator comes on and the
acoustic signals are active.
Use of the appliance
1. Be sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener.
2. Fill the salt container with dishwasher
salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appli-
ance.
5. Set the correct washing programme for
the type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
24
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GVW5820NY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW5820NY in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info