557244
20
Zoom out
Zoom in
Previous page
1/52
Next page
Using the detergent
20
30
BA D
C
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (D).
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
Using the combi detergent
tablets
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
the rinse aid dispenser. The rinse aid indica-
tor always comes on if the rinse aid dis-
penser is empty.
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse
aid and dishwasher salt, do these
steps:
1. Press the on/off button to activate the
appliance.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a
programme
Reset function
For some settings it is necessary that the
appliance is in user mode.
The appliance is in user mode when all the
programme indicators are on.
To set the appliance in user mode, do the
Reset function
1. Press and hold the programme button
until all the programme indicators come
on.
Starting a programme without delay
start
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Press the programme button again and
again until only the indicator of the pro-
gramme you want to set is on.
4. Close the appliance door. The pro-
gramme starts.
Starting a programme with delay
start
1. Set the programme.
2. Press the delay button to delay the start
of the programme of 3 hours.
The delay indicator comes on.
3. Close the appliance door. The count-
down starts.
When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while the
countdown operates
Do the Reset function.
When you cancel the delay start, you
have to set the programme again.
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GVW581 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW581 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim GVW581

Pelgrim GVW581 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info