482588
55
Zoom out
Zoom in
Previous page
1/68
Next page
Führen Sie folgende Schritte durch, um
den Signalton auszuschalten:
1. Schalten Sie das Gerät ein.
2. Stellen Sie sicher, dass sich das Gerät
im Einstellmodus befindet.
3. Halten Sie die Programmwahltaste so
lange gedrückt, bis die Programm-Kon-
trolllampe A blinkt und die Programm-
Kontrolllampe B leuchtet.
4. Sobald die Programm-Kontrolllampe A
blinkt und die Programm-Kontrolllampe
B leuchtet, drücken Sie sofort wieder
die Programmwahltaste.
Die Programm-Kontrolllampe A leuchtet
und die Programm-Kontrolllampe B
blinkt.
Nach einigen Sekunden erlischt die
Programm-Kontrolllampe A und die
Kontrolllampe Programmende leuchtet.
(Die Programm-Kontrolllampe B blinkt
weiterhin.)
Die Signaltöne sind eingeschaltet.
5. Drücken Sie noch einmal die Pro-
grammwahltaste. Die Kontrolllampe
Programmende erlischt.
Die akustischen Signale sind ausge-
schaltet.
6. Schalten Sie das Gerät zur Bestätigung
aus.
Führen Sie folgende Schritte durch, um
die Signaltöne erneut einzuschalten:
1. Führen Sie die Schritte 1 bis 4 aus, die
unter „Signaltöne ausschalten“ be-
schrieben sind.
2. Die Programm-Kontrolllampe A erlischt.
Die Kontrolllampe Programmende er-
lischt. (Die Programm-Kontrolllampe B
blinkt weiterhin.)
Die Signaltöne sind ausgeschaltet.
3. Drücken Sie noch einmal die Pro-
grammwahltaste. Die Programmende-
Kontrolllampe leuchtet auf.
Die Signaltöne sind eingeschaltet.
4. Schalten Sie das Gerät zur Bestätigung
aus.
Gebrauch des Gerätes
1. Prüfen Sie, ob die Einstellung des Was-
serenthärters der Wasserhärte in Ihrem
Gebiet entspricht. Andernfalls stellen
Sie ihn entsprechend ein.
2. Füllen Sie den Salzbehälter mit Ge-
schirrspülsalz.
3. Füllen Sie den Klarspülmittel-Dosierer
mit Klarspülmittel auf.
4. Ordnen Sie Geschirr und Besteck in
den Geschirrspüler ein.
5. Stellen Sie je nach Spülgut und Ver-
schmutzungsgrad das passende Spül-
programm ein.
6. Füllen Sie den Reinigungsmittelbehälter
mit der passenden Menge an Reini-
gungsmittel.
7. Starten Sie das Spülprogramm.
Einstellen des Wasserenthärters
Der Wasserenthärter hält die im Wasser
enthaltenen Minerale und Salze zurück. Die-
se Minerale und Salze können das Gerät
beschädigen.
Stellen Sie den Wasserenthärter ein, wenn
die Einstellung nicht der Wasserhärte in Ih-
rem Gebiet entspricht.
Wenden Sie sich an Ihr örtliches Wasser-
versorgungsunternehmen, um die Wasser-
härte in Ihrem Gebiet zu erfahren.
55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GVW580ONY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW580ONY in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info