482588

Pelgrim GVW580ONY Manual

22
Zoom out
Zoom in
Previous page
1/68
Next page
• To cancel a washing programme in pro-
gress. Refer to the chapter 'Setting and
starting a washing programme'.
Programme lights A and B
These lights have also an auxiliary function
when you:
• Adjust the level of the water softener.
• Deactivate/activate the audible signals.
Delay start button
Press this button to delay the start of the
washing programme of three hours. Refer
to 'Setting and starting a washing pro-
gramme'.
Setting mode
The appliance must be in setting mode
for these operations:
• To select and start a washing pro-
gramme.
• To adjust electronically the level of the
water softener.
• To deactivate/activate the audible sig-
nals.
Press the on/off button. The appliance
is in setting mode when:
• All the programme lights are off and the
end-of-programme indicator light flashes.
Press the on/off button. The appliance
is not in setting mode when:
• Only one programme light comes on.
– It is necessary to cancel the pro-
gramme to go back to the setting
mode. Refer to 'Setting and starting a
washing programme'.
Audible signals
You can hear the audible signals when:
• The washing programme ends.
• The appliance has a malfunction.
Do these steps to deactivate the
audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold the programme button
until the programme light A flashes and
the programme light B comes on.
4. When the programme light A flashes
and the programme light B comes on,
press immediately the programme but-
ton again.
The programme light A comes on and
the programme light B starts to flash.
After some seconds the programme
light A goes off and the end-of-pro-
gramme indicator light comes on. (The
programme light B continues to flash).
– The audible signals are active.
5. Press the programme button again.
The end-of-programme indicator light
goes off.
– The audible signals are deactivated.
6. Switch of the appliance to confirm the
operation.
Do these steps to activate again the
audible signals:
1. Follow the procedure how to deactivate
the audible signals from point 1 to point
4.
2. The programme light A goes off. The
end-of-programme indicator light is off.
(The programme light B continues to
flash).
– The audible signals are deactivated.
3. Press the programme button again.
The end-of-programme indicator light
comes on.
– The audible signals are active.
4. Switch of the appliance to confirm the
operation.
Use of the appliance
1. Be sure that the set level of the water
softener agrees with the water hard-
ness in your area. If not, adjust the wa-
ter softener.
2. Fill the salt container with dishwasher
salt.
3. Fill the rinse aid dispenser with rinse
aid.
4. Load cutlery and dishes into the appli-
ance.
5. Set the correct washing programme for
the type of load and soil.
22
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GVW580ONY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW580ONY in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info