482588
19
Zoom out
Zoom in
Previous page
1/68
Next page
Make sure that the spray arms can move
freely before you start a washing pro-
gramme.
The appliance can release hot steam if
you open the door while a washing pro-
gramme operates. There is a risk of skin
burns.
Do not remove the dishes from the appli-
ance until the washing programme is
completed.
Care and cleaning
Before you clean the appliance, deacti-
vate it and disconnect the mains plug
from the mains socket.
Do not use flammable products or prod-
ucts that can cause corrosion.
Do not use the appliance without the fil-
ters. Make sure that the installation of the
filters is correct. An incorrect installation
causes unsatisfactory washing results
and damage to the appliance.
Do not use spray water or steam to clean
the appliance. Risk of electrical shock
and damage to the appliance.
Installation
Make sure that the appliance is not dam-
aged. Do not install or connect a dam-
aged appliance, contact the supplier.
Remove all packaging before you install
and use the appliance.
Only a qualified person must do the elec-
trical connection, the plumbing and the
installation of the appliance. This to pre-
vent the risks of structural damage or in-
jury.
Make sure that the mains plug is discon-
nected from the mains socket during in-
stallation.
Do not drill into the sides of the appliance
to prevent damage to hydraulic compo-
nents and electrical components.
Important!Obey the instructions in the
template supplied with the appliance:
To install the appliance.
To assemble the door panel.
To connect to the water supply and
drain.
Make sure that the appliance is installed
below and adjacent to safe structures.
Frost precautions
Do not install the appliance where the
temperature is less than 0 °C.
The manufacturer is not responsible for
frost damage.
Water connection
Use new hoses to connect the appliance
to the water supply. Do not use used ho-
ses.
Do not connect the appliance to new
pipes or pipes not used for a long time.
Let the water flow for some minutes, then
connect the inlet hose.
Make sure not to squash or cause dam-
age to the water hoses when you install
the appliance.
Make sure that the water couplings are
tight to prevent a water leakage.
The first time you use the appliance,
make sure that the hoses do not have
water leaks.
The water inlet hose has a safety valve
and a double sheath with an inner mains
cable. There is pressure in the water inlet
hose only when the water flows. If there
is a leak in the water inlet hose, the safety
valve interrupts the flow of water.
Be careful when you connect the water
inlet hose:
Do not put the water inlet hose or
the safety valve in water.
If the water inlet hose or the safety
valve are damaged, immediately dis-
connect the mains plug from the
mains socket.
Contact the service centre to replace
the water inlet hose with safety
valve.
Warning! Dangerous voltage.
Electrical connection
The appliance must be earthed.
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GVW580ONY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW580ONY in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info