Manual Pelgrim GVW480ONY (page 83 of 97) (English, German, Dutch, French)

482586

Zoom out

Zoom in

1/97

GB 11

OPERATION

Adding salt

This machine is equipped with a water softener. To use the water

softener, fill the dishwasher with salt.

1. Remove the bottom basket and then unscrew the cap from the

reservoir.

2. Before filling the reservoir for the first time, pour in one litre of water.

3. Insert the funnel into the reservoir opening. Pour in approximately

1 kg of salt. It is normal for a little water to flow out of the opening

when doing this. Note! Clear up any spilled salt and always run a

full cycle immediately afterwards to prevent damage to the bottom.

4. Screw the cap back on firmly.

Note! Always fill the salt reservoir and adjust the water hardness setting

before using the dishwasher. Refill the salt reservoir when the water

softener indicator lights up. It is possible that the light will remain lit for

a short while after the salt reservoir is filled. It will go out automatically

when enough salt has been dissolved in the water.

Setting the salt consumption

• Open the door ,Switch on the appliance;

• Press the Program button for more than 5 seconds to start the

water softener set model within 60 seconds after the appliance

was switched on( The Salt and Rinse aid warninglights will be on

periodically when it get in the set model );

• Press the Program button to select the proper set according to your

local environment, the sets will change in the following sequence:

H1->H2->H3->H4->H5->H6;

• Press the Power button to end the set up model.

Adjust the salt consumption according to the table below:

Your local water authority can inform you how hard your mains water is.

WATER HARDNESS

degrees Clark

0 - 6

7 - 14

15 - 21

22 - 28

29 - 42

43 - 69

ºdH

0 - 5

6 - 11

12 - 17

18 - 22

23 - 34

35 - 55

mmol/l

0 - 0,94

1,0 - 2,0

2,1 - 3,0

3,1 - 4,0

4,1 - 6,0

6,1 - 9,8

setting

salt consumption

(grams/cycle)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW480ONY in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim GVW480ONY Manual

Product: