Manual Pelgrim GVW 567 (page 73 of 90) (English, German, Dutch, French)

78023

Zoom out

Zoom in

1/90

• activate/deactivate the audible signals.

Setting mode

Press the On/Off button; if ALL programme

button lights come on, the appliance is in

setting mode.

Always remember that when performing

the following operations:

– selecting a washing programme,

– setting the water softener level,

– activating/deactivating the rinse aid,

– activating/deactivating the audible

signals,

the appliance MUST be in setting mode.

Press the On/Off button; if a programme but-

ton light comes on, the last performed or se-

lected programme is still set. In this case, to

return to setting mode, the programme has

to be cancelled.

To cancel a set programme or a

programme in progress

Simultaneously press and hold the two func-

tion buttons B and C until all the programme

button lights come on. The programme has

been cancelled and the machine is now in

setting mode.

Audible signals

Audible signals help to indicate which oper-

ations the dishwasher is performing:

– adjustment of the water softener,

– end of the washing programme,

– intervention of an alarm due to malfunction

of the machine.

Factory setting: audible signals active

It is possible to deactivate the audible

signals.

Deactivation/activation of the audible

signals

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C until the lights of function

buttons A , B and C start flashing.

3. Press function button C . The lights of

function buttons A and B go off while the

light of function button C goes on flash-

ing. Simultaneously the End indicator

light comes on.

The audible signals are active.

4. To deactivate the audible signals, press

function button C again. The End indica-

tor light goes off.

The audible signals are deactivated.

5. 5. To memorize the operation, switch off

the dishwasher by pressing the On/Off

button.

To activate again the audible signals fol-

low the above operations until the End

indicator light comes on.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: '3 in 1', '4 in 1', '5 in

1' etc. set the multitab function. (Re-

fer to 'Multitab function').

Setting the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hard-

ness is measured in equivalent scales, Ger-

man degrees (dH°), French degrees (°TH)

and mmol/l (millimol per litre - international

unit for the hardness of water).

The softener should be adjusted according

to the hardness of the water in your area.

Your local Water Authority can advise you on

the hardness of the water in your area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW 567 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim GVW 567 Manual

Product: