Manual Pelgrim GVW 546 (page 78 of 87) (English, German, Dutch, French)

78017

Zoom out

Zoom in

1/87

4. Close the lid and press until it locks in

place.

Detergent tablets from different manu-

facturers dissolve at different rates. For

this reason, some detergent tablets do

not attain their full cleaning power during

short washing programmes. Therefore,

please use long washing programmes

when using detergent tablets, to ensure

the complete removal of detergent re-

siduals.

Multitab function

This appliance is equipped with the 'Multitab

function', that allows the use of the 'Multitab'

combi detergent tablets.

These products are detergents with a com-

bined cleaning, rinsing and salt functions.

They can also contain other different agents

depending on which kind of tablets you

choose ('3 in 1', '4 in 1', '5 in 1' etc...).

Check whether these detergents are suitable

for your water hardness. See the manufac-

turers instructions.

Once this function is selected it will remain

active for all following wash programmes.

With the selection of this function the inflow

of rinse aid and salt from each respective

supply container is automatically deactivated

and also the indicator light for salt is deacti-

vated.

When using the 'Multitab function', the cycle

duration may change.

Activate/deactivate the 'Multitab func-

tion' before the start of a washing pro-

gramme.

Once the programme is running, the

'Multitab function' can NO longer be

changed. If you want to cancel the 'Mul-

titab function' you have to cancel the

programme setting and then deactivate

the 'Multitab function'. In this case you

have to set a washing programme (and

desired options) again.

Activation/deactivation of the multitab

function

Simultaneously press and hold the two mul-

titab buttons (function buttons D and E) until

the multitab indicator light comes on. This

means that the function is active.

To deactivate the function press the same

buttons again until the indicator light corre-

sponding to the multitab function symbol

goes off.

If the drying results are not satisfac-

tory we suggest that you:

1. Fill up the rinse aid dispenser with

rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position

• The activation/deactivation of the

rinse aid is only possible with the mul-

titab function active.

Activation/deactivation of the rinse aid

dispenser

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C , until the lights of func-

tion buttons A , B , and C start flashing.

3. Press function button B , the lights of

function buttons A and C go off while the

light of function button B continues to

flash.

4. To activate the rinse aid dispenser, press

button B again, the End indicator light

comes on, indicating that the rinse aid

dispenser has been activated.

5. To memorize the operation, switch off the

dishwasher by pressing the On/Off but-

ton.

6. To deactivate the rinse aid dispenser

again, follow the above instructions until

the End indicator light goes off.

If you decide to revert back to the

use of individual detergents we ad-

vise that you:

1. Deactivate the Multitab function.

2. Fill up the salt container and the rinse

aid dispenser again.

3. Adjust the water hardness setting to

the highest setting and perform 1

normal washing programme without

loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the wa-

ter in your area.

5. Adjust the rinse aid dosage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW 546 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim GVW 546 Manual

Product: