557145
75
Zoom out
Zoom in
Previous page
1/90
Next page
EN 9
OPERATION WITH TOUCH CONTROLS
If the release procedure is repeated 5 times in a row during a
15 minute time span, the device will indicate Flt06 and will accept
no further request for release for another 15 minutes.
Switching off one burner
Touch the + and the - button simultaneously for 2 seconds of the
burner you want to switch off or use the - button to set the burner to 0.
The burner switches off and above the touch control a blinking ‘H’ will
remain visible for some minutes to indicate that the burner is still hot.
Switching off all burners at the same time
Touch the On/Off button.
The hob is now switched off. If a burner is still hot, a blinking ‘H’ will remain
visible in the display of the corresponding burner for some minutes.
Burner switch-off time (GKT564/GKT595)
It is possible to set a switch-off time for every burner. The burner will
then switch off automatically when the set time has passed. You can
only set the switch-off time if the burner is ignited.
The countdown starts as soon as the programming of the switch-off
time for a burner has been confirmed. If you do not confirm the set
time, the countdown will start after several seconds.
The set switch-off time can be seen in the timer display for each
burner (after the right burner has been selected).
If the time has elapsed, the burner switches off and you will hear a
beep several times during 30 seconds.
Programming the burner switch-off time
Switch on the hob, ignite a burner and set the power.
Touch the timer button.
An indicator above the timer button will start blinking to indicate
that the burner is currently selected for programming the switch-
off time. With the timer button you can select each burner that has
been ignited. In the display ‘t0.00’ appears to indicate that there has
not been set a time yet for the selected burner.
Touch the + button of the timer to set the switch-off time for the
selected burner (steps of 1 minute).
Touch the timer button again to confirm the setting.
Above the timer button the indicator lights of burners that are linked
to a timer will remain illuminated.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GK595 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GK595 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info