Manual Pelgrim GK497 (page 54 of 60) (English, German, Dutch, French)

482577

Zoom out

Zoom in

1/60

54 55

installation instructions

General

The fitting of the appliance should only be carried out by a registered Corgi

gas fitter.

Please note:

n This appliance is not connected to a flue duct. Take care to ensure that there

is sufficient ventilation.

n Do not install a hob next to a high cupboard or wall made of flammable

material. (If there is no alternative, ensure that there is a minimal distance of

100 mm between the outer edge of the hob and the wall in question.

Also ensure that there is a minimum distance of 650 mm between the hob

and any overhead extractor fan which may be installed.)

Electrical connection (solely for appliances with a

spark switch)

Electrical connection: 230 V - 50 Hz.

This appliance complies the regulations concerning electromagnetic

compatibility in directive 89/336/EEC.

n The electrical connection must comply with national and local regulations.

n Wall socket and plug must be accessible at all times.

n If you want to make a fixed connection, ensure that a multi-pole switch with a

distance between contacts of 3 mm is installed in the supply cable.

Please note:

n This appliance must be earthed.

n If the connection cable becomes damaged, it should be replaced by

the manufacturer’s service department or by a person with equivalent

qualifications, in order to prevent dangerous situations from arising.

700003276000_HL_GK4_NL_F_DE_GB.indd 54 23-11-2009 12:44:07

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GK497 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim GK497 Manual

Product: