72057
48
Zoom out
Zoom in
Previous page
1/53
Next page
95
faults
Table
If the appliance does not work properly, this does not always mean that it is
defective. Try to deal with the problem yourself first.
Phone the service department if the advice given below does not help. Only
authorised personnel may open the appliance or carry out work on the mains
power supply.
Damage caused by incorrect connection, incorrect installation or incorrect use
is not covered by the warranty.
In the case of faults visit the internet site www.hps.nl.
Fault
Cooking zones do not get hot.
Error codes F00-F12 in the
display.
Error code F3 appears.
Error code F99 appears.
Spontaneous change of
setting selected.
Cause
– Appliance incorrectly
connected.
– Plug not, or not completely,
in the socket.
– Fuse(s) in the meter
cupboard defective.
– A button is defective or dirty
or there is an object on top
of it. Each button has its own
number, from 00 to 12. The
number associated with the
button appears in the
display.
– Transistors overheated.
– The appliance has insufficient
ventilation.
– Two or more buttons were
operated for a long time.
– Pan too close to buttons.
Solution
– See the installation
instructions for correct
connection.
– Put the plug into the socket
– Check the fuses in the meter
cupboard.
– Clean the appliance. Do not
place any objects on the
control panel.
– Allow the appliance to cool
down until the code
disappears.
– Make sure there is sufficient
ventilation.
– Do not operate more than
one button at the same time.
– Make sure that pan is at least
20 mm from buttons.
94
maintenance
General
Clean the cooking appliance after each use. You can use a mild cleaning agent
for this - for example, washing-up liquid. Always clean the hobs after use. You
can use a mild cleaning agent, such as washing-up liquid, for this purpose.
Special cleaning agents for ceramic hobs have the advantage that a thin film
remains on the glass surface so that over-cooked food and lime scale are less
likely to get burnt into the hob, making it easier to clean the next time.
It is best to let the hob cool down before cleaning it. Over-cooked food
containing a lot of sugar and acids, such as apple sauce, rhubarb or red
cabbage are best removed immediately with a damp dish cloth to prevent them
getting burnt into the hob. Be careful with the hot cooking zone!
You can use a glass-scraper to remove obstinate food residue.
Traces of metals (due to sliding pans) can be difficult to remove.Special
products are available for removing traces of metal.
Never use
You should never use scouring agents. These cause scratches in which lime
deposits and dirt can accumulate.
Never use sharp objects such as steel wool and scourers.
For cleaning tips refer to the internet site 'www.hps.nl'.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim CKT 745 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim CKT 745 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info