692012
25
Zoom out
Zoom in
Previous page
1/28
Next page
EN 7
Installation
Before connecting the appliance to the power supply, check that
the wires of your electric installation have sufficient diameter to
supply power to the appliance during normal use. The fuse for the
installation should be 10 amps.
It is necessary to provide a bipolar cut-off device in the power
supply circuit, with an open contact gap of more than 3 mm.
The electric connection should be done before the appliance is set
in the cabinet.
The drawer should be connected by a (standard) power cord with
three 1 mm² wires (1 single phase + 1 N + ground) to the
220-240 V single phase power supply via an electric circuit
corresponding to the CEI 60083 standard or complying with the
installation rules. The protective wire (green/yellow) corresponds to
ground on the appliance and should be connected to the ground of
the installation.
In the case of a connection via an electric outlet, the outlet should
be accessible even with the appliance installed. The neutral on the
heating drawer (blue wire) should be connected to neutral on the
power supply.
YOUR DRAWER
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim ACW624 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim ACW624 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info