773682
60
Zoom out
Zoom in
Previous page
1/62
Next page
MY20P02-2_1.0_13.01.2020 60
Glossary
Fracture
Source: EN 15194:2017: unintentional separation
into two or more parts.
Maintenance
Source: DIN 31051: maintenance is generally
performed at regular intervals and often carried
out by trained technical staff. This ensures a
maximum service life and low wear and tear for
the maintained items. Proper maintenance is
often also a pre-requisite for providing a warranty.
Maximum continuous power
Source: ZEG: the maximum continuous power is
the maximum power for the electric motor output
shaft during 30 minutes.
Maximum saddle height
Source: EN 15194:2017: vertical distance from
the ground to the point where the top of the seat
surface is intersected by the seat-post axis,
measured with the saddle in a horizontal position
and with the seat-post set to the minimum
insertion-depth mark.
Maximum tyre pressure
Source: EN 15194:2017: maximum tyre pressure
recommended by the tyre or rim manufacturer for
a safe and efficient performance. If the rim and
tyre both indicate a maximum tyre pressure, the
maximum inflation pressure is the lower of the two
pressures indicated.
Minimum insertion depth mark
Source: EN 15194:2017: mark indicating the
minimum insertion depth of handlebar stem into
fork steerer (fork stem) or seat post into frame.
Model year
Source: ZEG: the model year refers to the first
production year that the series-manufactured
bicycle was manufactured in the version in
question and is not always identical to the year of
manufacture. The year of manufacture may be
before the model year in some cases. If no
technical modifications are made to the series,
bicycles from a previous model year may also be
produced after the model year in question.
Mountain bike
Source: ISO 4210-2: bicycle designed for use off-
road on rough terrain, on public roads, and on
public pathways, equipped with a suitably
strengthened frame and other components, and,
typically, with wide-section tyres with coarse tread
patterns and a wide range of transmission gears.
Negative deflection
Negative deflection or sag is fork compression
caused by the weight of the rider and their gear
(e.g. a backpack), their sitting position and the
frame geometry.
Off-road rough terrain
Source: EN 15194:2017: rough gravel tracks,
forest trails and other generally off-road tracks
where tree roots and rocks are likely to be
encountered.
Operating instructions
Source: ISO/DIS 20607:2018: part of the user
information that machine manufacturers provide
to machine operators; it contains guidance,
instructions and tips related to the use of the
machine in all its life cycle phases.
Permitted total weight
Source: EN 15194:2017: weight of the fully
assembled bicycle plus the rider and baggage, as
specified by the manufacturer.
Pressure point
Source: ZEG: The pressure point on a brake is the
point on the brake lever where the brake disc or
brake pads respond and the braking process is
initiated.
Quick-release device, quick release
Source: EN 15194:2017: lever actuated
mechanism that connects, retains or secures a
wheel or any other component.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pegasus 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pegasus 2020 in the language / languages: English as an attachment in your email.

The manual is 7.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pegasus 2020

Pegasus 2020 User Manual - German - 66 pages

Pegasus 2020 User Manual - Dutch - 63 pages

Pegasus 2020 User Manual - French - 65 pages

Pegasus 2020 User Manual - Italian - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info