769198

Peg Perego Viaggio 1-2-3 Via Manual

33
Zoom out
Zoom in
Previous page
1/184
Next page
33
How to install the Viaggio 1-2-3 Via car
seat
32 Pull the yellow lever at the front of the seat base (1)
and fully eject the ISOFIX anchors (2).
33 Secure the ISOFIX anchors in their housings until they
click; a red/green LED on the sides of the base will
indicate correct anchoring.
34 Pull the yellow lever (1) and simultaneously push the
child seat (2) firmly against the car seat.
How to secure your child in the Viaggio
1-2-3 Via car seat
35 Seat your child (fig_a) and pull the car 3-point harness
as illustrated (fig_b).
36 Fasten the seat belt, ensuring that it clicks into place.
Position the two sections of the belt as shown in the
figure.
37 To finish, pass the belt from the shoulder straps on the
head rest: insert the belt between the strap and head
rest (1) until is easily slides in the strap slot (2).
IMPORTANT: if the belt is loose, pull over the
strap (3). Verify that the belt is always tensioned
and untwisted.
38 To remove the belt, remove it from the strap slot (1)
and slide it between the strap and head rest (2) until
fully removed.
How to adjust the seat and head rest
39 the safety belts are correctly positioned if the
child’s shoulders are slightly below the intersection
point of the safety belts, as shown in the figure.
Adjust the head rest to the desired position using the rear
lever.
40 Follow your child's growth to guarantee correct belt
passage. To further increase height, lift the backrest to the
desired position using the side buttons.
41 The side flaps can be widened for further adjustments as
illustrated.
42 Viaggio 1-2-3 Via reclining can be adjusted. Make sure
the belt is always correctly fastened. If the car has an
adjustable seat back, it can be reclined for maximum
Viaggio 1-2-3 Via reclining (fig_a). If the seat back cannot
be adjusted, if the car head rest interferes with the child
seat head rest, remove the car head rest (fig_b).
43 To remove the child seat from the car seat, move the child
seat away from the car seat by pulling the lever (1) and
seat (2) simultaneously until the yellow side levers appear.
If used, release Top Tether.
44 Once the side levers are visible, release as illustrated and
remove the child seat.
How to remove the fabric cover
The fabric seat of the Viaggio 1-2-3 Via can be removed
for cleaning.
45 Follow the washing instructions on the seat package.
46 Lift the head rest (1) and remove the shoulder pad
hooks (2) located behind the backrest and under the
belt, as illustrated.
47 Recline the car seat to the maximum position (1),
lengthen the straps and extract the metal anchor from
behind the seat (2) as illustrated and unhook the strap.
REMOVE THE LINING FROM THE HEADREST.
48 Remove the lining from the head rest from the bottom
and then top
REMOVING THE LINING FROM THE BACKREST
49 Remove the bottom part of the backrest lining
(fig_a) and lift the two side flaps vertically out of their
housings (fig_b). Lift the head rest for easier removal.
REMOVING THE LINING FROM THE SEAT:
50 Unbutton the buttons on the side of the seat. Remove
the lining towards the front of the seat
Maintenance and cleaning of the fabric
lining
Brush the fabric parts to remove dust.
• Follow the washing instructions on the label sewn onto
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peg Perego Viaggio 1-2-3 Via at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Viaggio 1-2-3 Via in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info