Manual Peg Perego PRIMO VIAGGIO 360 (page 16 of 116) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish, Finnish)

769196

Zoom out

Zoom in

1/116

must repeat the operation until the indicator turns

green.

6 To release the base from the vehicle seat, detach

the Isofix connectors from the hooks in the vehicle

by pulling the 2 front lateral levels on the base (1)

and the base in the travel direction (2).

Once the rear lateral levers are visible (fig_a),

release the base as shown in the figure (3).

7 Adjust the height of the supporting foot by

pressing the lever at the base of the foot until it

touches the vehicle floor.

IMPORTANT: Ensure that the leg is positioned

vertically and the foot firmly supported on the car

floor, even if the seat base becomes slightly raised.

IMPORTANT: If there is a storage

compartment in the floor of your vehicle in the

area where the leg rests, open the compartment

lid and rest the leg on the base of the

compartment.

Car seat features

8 Once taken out of the box, the car seat is oriented

rear facing with respect to vehicle direction. A

lever located on the top of the base nose allows

the rotation of the car seat.

The car seat can be rotated 90° either side by

pulling on the lever. This allows an easy and safe

installation of the child. The two indicators located

on top of the base are red in this position.

IMPORTANT: Do not keep the seat in this

position when the vehicle is in motion.

9 The car seat can be rotated forward facing.

IMPORTANT: Do not use the car seat forward

facing before the child's age exceeds 15 months.

To do this, push the button under the base and

release the safety device.

10 Use the handle to rotate the seat to the required

position until the indicator is green.

11 To adjust the car seat’s inclination, rotate the knob

until the seat is in the desired position.

12 The headrest must be adjusted to match the

child’s height. There are several positions.

To switch from a low to a higher position: pull the

tongue at the centre of the head rest (1) upward;

the head rest simultaneously lifts (2).

To switch from a high position to a lower one: pull

the lever in the upper central part of the headrest

upwards and, at the same time, push the headrest

down to the desired position.

When you have finished, slightly move the

headrest to check it is properly locked into place.

13 To guarantee greater safety, the car seat is

equipped with Kinetic Pods. Open the Kinetic

Pod on the side near the car door (fig_a). To close

it, pull the Kinetic Pod and fold it down into the

specific hollow (fig_b).

How to strap your child

14 The car seat uses a 5-point harness to protect

your child. Before placing the child on the seat.

Act on the central release button and pull the

straps, loosening the belts (fig_a). Do not pull the

shoulder pads.

Open the chest clip following the procedure

shown (fig_b), unfasten the safety belts by acting

on the red button of the crotch strap’s buckle

(fig_c).

15 Attach the buckles to the side elastics and pull the

crotch strap towards the front of the seat to make

room for the child. Make sure the sitting area is

free.

16 Place the child in the car seat and arrange the

harness over the child’s shoulders and waist. The

correct height for the safety belts is when the belt

slots on the backrest are at the same height of the

shoulders or above (green area), as shown in the

picture.

Make sure the straps are not in the red area.

17 Attach the safety straps by overlapping the two

belts (1) and inserting the metal hooks into the

crotch strap buckle until it clicks (2). Attach the

belt clip on the chest by combining the two parts

as shown in the picture (3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego PRIMO VIAGGIO 360 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peg Perego PRIMO VIAGGIO 360 Manual

Product: