Manual Peg Perego Pliko Switch Easy Drive (page 15 of 50) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish, Finnish)

769184

Zoom out

Zoom in

1/50

- 15 -

FEATURES OF THE ITEM

_ The item is numbered progressively.

_ Pliko Switch is a stroller with a reversible seat: facing

the person pushing or facing forwards.

_ Pliko Switch is made up of two elements: Pliko Switch

CHASSIS and Pliko Switch SEAT.

COMPONENTS OF THE ITEM

Check the contents of the packaging and if you have

any complaints please contact the Assistance Service.

_ Pliko Switch Chassis: a basket, 2 swiveling or locking

front wheels, 2 rear wheels with a central brake bar

and a drink holder.

_ Pliko Switch Seat: front bar; hood; cover; rain canopy.

INSTRUCTIONS

1 OPENING: Raise the levers on the handlebar together

(fig_a) and pull upwards until the chassis is completely

open (fig_b). Check that the chassis is correctly

opened: the side tubes must be locked together (fig_c).

Lastly, slide the two elements along the handle as

shown in the figure (fig_d).

2 FITTING THE BASKET: Slip the loops onto the hooks at

the front (fig_a) and the rear (fig_b).

3 FITTING THE CUP HOLDER: insert the cup holder on

the corresponding peg and press down until it clicks

into place (fig_a). The cup holder can be attached to

either side of the chassis.

4 ADJUSTABLE HANDLEBAR: Pliko Switch Easy Drive: To

adjust the height of the handlebar, press both of the

side buttons at the same time (fig_a) and lock it in the

desired position (fig_b).

5 FIXED OR SWIVELLING FRONT WHEELS: Lift the levers

to prevent the wheels from swiveling (fig_a) and lower

them to allow the wheels to swivel (fig_b). On uneven

surfaces, the wheels should be set to their fixed position.

6 BRAKES: Press a brake lever to immobilize the chassis

(fig_a) and lift the lever to release it (fig_b).

7 MOUNTING THE SEAT TO THE CHASSIS: the reversible seat

can be attached to the chassis either facing the person

pushing the stroller (fig_a), or facing forwards (fig_b),

place the seat on the chassis so that it is aligned with the

relative symbols and press downwards with both hands

until you hear two clicks confirming that it has locked

into position. Ensure the seat is correctly secured by

attempting to pull it upwards by gripping the front bar.

8 REMOVING THE SEAT FROM THE CHASSIS: Hold down

the two round buttons on the sides of the seat (fig_a),

press the two levers under the armrests (fig_b) and

pull up the seat (fig_c) until it is released. The seat can

be removed from and re-attached to the chassis when

there is a child in it.

9 FRONT BAR: To attach the front bar, slide the

connections into the ends of the armrests and push

them in until they click into place (fig_a). To remove the

front bar, press the two buttons and pull it outwards

(fig_b). To make it easier for the child to get in and out,

it is also possible to open the front bar on one side only.

10 BACKREST: to recline the backrest lift the lever (fig_a)

and choose one of the 4 positions (fig_b).

11 FOOTREST: to lower the footrest push the two levers

downwards and then push the footrest downwards

(fig_a); to raise the footrest lift it upwards (fig_b).

12 FIVE POINT SAFETY HARNESS: To fasten it, push the

two waist strap buckles (with the shoulder straps

attached – arrow_a) into the leg divider until they

click into place (arrow_b). To unfasten it, press the

round button in the centre of the buckle (arrow_c)

and pull the waist straps out (arrow_d).

13 To tighten the waist strap, pull on both sides in the

direction of the arrow (arrow_a). To loosen it do the

opposite. The waist strap can be tightened as far as

the safety lock (fig_b).

14 To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow_a) until the

buckles are released and insert them in the backrest

loops (arrow_b). Remove the shoulder straps from the

sack (arrow_c) and insert them in the most appropriate

loop (arrow_d), then re-attach the two buckles on the

rear of the backrest (arrow_e) The buckles are securely

attached when a click is heard (fig_f).

15 HOOD: to attach the hood insert the connections into

the sides of the seat (fig_a) and then fasten the buttons

on the rear of the backrest (fig_b). To remove the hood:

disengage the connections and unbutton from the

backrest. To raise the hood: pull it towards you; to close

the hood: push it back. To convert the hood into a sun

canopy, open the double zipper (fig_c) and unfasten the

buttons on the rear of the backrest. The child’s favorite

toy can be hung from the loop on the hood (fig_d).

16 COVER: Fit the cover on and fasten the buttons under

the leg rest (fig_a) and on the sides of it. For the baby

carriage version, raise the leg rest, put the cover over

the front bar (fig_b) and fasten it with the buttons on

the hood (fig_c).

17 For the stroller version, lower the footrest, insert the

cover underneath the front bar (fig_a) and secure it

according to the model purchased A, B.

18 RAIN CANOPY: position the rain canopy on the stroller

(fig_a) and insert the two lateral loops over the hood

buttons (fig_b).

19 Secure the rain canopy by attaching the elastic loop

to the rear uprights (fig_a) or to the front uprights

(fig_b), according to the seat position.

20 REAR LEDGE: the rear ledge makes it easier to

negotiate kerbs or level differences with the stroller

(fig_a).

21 FOLDING UP: To fold the stroller, slide the two elements

along the handle as shown in the figure. The stroller

can be folded without the seat, with the seat facing

the person pushing, or with the seat facing forwards.

If the seat is facing the person pushing: before folding

it, lower the backrest completely. If the seat is facing

forwards: before folding the stroller raise the backrest,

then lower it once the stroller is folded. To fold the

stroller, set the front wheels to their fixed position and

close the hood (if fitted).

Lift the two levers on the handlebar one at a time until

they click, push downwards to release the side tubes

(fig_a-b) and pull the central handle upwards (fig_c)

until the safety catches engage (fig_d). On a folded Pliko

Switch Easy Drive chassis with the seat facing the person

pushing, the handlebar is lowered to make it even more

compact.

The stroller is freestanding when folded up.

22 TRANSPORT: the stroller can be carried by the central

handle, keeping the front wheels fixed (fig_a) or by

the side handle (fig_b).

23 REMOVABLE COVERS: Pull the fabric covering off the ledge

(fig_a), release the attachments of the fabric covering from

the armrests (fig_b), unfasten the buttons on the sides of

the backrest (fig_c) and remove the leg divider strap from

above by pushing it from under the seat (fig_d).

GANCIOMATIC SYSTEM

24 Ganciomatic is a fast and practical system that allows

you to attach the Navetta or PrimoNido bassinet unit,

the Primo Viaggio car seat or the Pliko Switch seat to

the Ganciomatic Base of the chassis in one quick step.

Place the item on the Ganciomatic Base and press

down with both hands until it clicks into place.

Always apply the chassis or stroller brake before

attaching and removing products (refer to the

respective instruction manuals).

Check that the child transport unit is properly attached.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Pliko Switch Easy Drive in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peg Perego Pliko Switch Easy Drive Manual

Product: