Manual Peg Perego Pliko Switch compact (page 17 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish, Finnish)

769183

Zoom out

Zoom in

1/56

- 17 -

_ Do not use the release levers to move or lift the

stroller when the child is in it.

_ WARNING: Do not add a mattress pad.

Pliko Switch compact, the compact stroller with

reversible baby seat!

Full version with hood, cover and rain canopy.

Sports version with hood and rain canopy (Pliko

Switch compact On Track Sportivo).

FEATURES OF THE ITEM

_ The item is numbered progressively.

_ Pliko Switch is a stroller with a reversible seat: facing

the person pushing or facing forwards.

_ Pliko Switch is made up of two elements: Pliko Switch

CHASSIS and Pliko Switch SEAT.

COMPONENTS OF THE ITEM

Check the contents of the packaging and if you have

any complaints please contact the Assistance Service.

_ Pliko Switch Chassis: a basket, 2 swiveling or locking

front wheels, 2 rear wheels with a central brake bar

and a drink holder.

_ Pliko Switch baby seat: front bumper bar; hood; cover;

rain canopy.

_ Pliko Switch On Track Sportivo baby seat: front bar;

hood; rain canopy.

INSTRUCTIONS

1 PACKING PROTECTION: before opening the chassis

remove the protection (fig_a), otherwise it will not

open correctly (fig_b).

2 OPENING: Raise the levers on the two handles

together (fig_a) and pull upwards until the chassis

is completely open (fig_b). Check that the chassis

is correctly opened: the side tubes must be locked

together (fig_c).

3 FITTING THE FRONT WHEELS: First check that the

washer is in place, as shown in the figure, lower the

levers on the two front wheels (fig_a) and push them

until they click into place (fig_b).

4 FITTING THE REAR WHEELS: Push the wheels until

they click into place (fig_a) and check that they are

properly attached (fig_b).

5 Finally, attach the element in the centre of the brake

bar to the chassis (fig_a) and check that it has slotted

into place properly (fig_b).

6 FITTING THE BASKET: Slip the loops onto the hooks at

the front (fig_a) and the rear (fig_b).

7 FITTING THE CUP HOLDER: insert the cup holder on

the corresponding peg and press down until it clicks

into place (fig_a). The cup holder can be attached to

either side of the chassis.

8 ADJUSTABLE HANDLES: Pliko Switch compact: To raise

or lower the handles, hold the button down (fig_a)

and adjust them (fig_b).

9 FIXED OR SWIVELLING FRONT WHEELS: Lift the levers

to prevent the wheels from swiveling (fig_a) and

lower them to allow the wheels to swivel (fig_b). On

uneven surfaces, the wheels should be set to their

fixed position.

10 BRAKES: Press a brake lever to immobilize the chassis

(fig_a) and lift the lever to release it (fig_b).

11 MOUNTING THE SEAT TO THE CHASSIS: the reversible

seat can be attached to the chassis either facing

the person pushing the stroller (fig_a), or facing

forwards (fig_b), place the seat on the chassis so

that it is aligned with the relative symbols and press

downwards with both hands until you hear two clicks

confirming that it has locked into position. Ensure

the seat is correctly secured by attempting to pull it

upwards by gripping the front bar.

12 REMOVING THE SEAT FROM THE CHASSIS: Hold down

the two round buttons on the sides of the seat (fig_a),

press the two levers under the armrests (fig_b) and

pull up the seat (fig_c) until it is released.

13 FRONT BAR: To attach the front bar, slide the

connections into the ends of the armrests and push

them in until they click into place (fig_a). To remove

the front bar, press the two buttons and pull it

outwards (fig_b). To make it easier for the child to get

in and out, it is also possible to open the front bar on

one side only.

14 BACKREST: to recline the backrest lift the lever (fig_a)

and choose one of the 4 positions (fig_b).

15 FOOTREST: to lower the footrest push the two levers

downwards and then push the footrest downwards

(fig_a); to raise the footrest lift it upwards (fig_b).

16 FIVE POINT SAFETY HARNESS: To fasten it, push the

two waist strap buckles (with the shoulder straps

attached – arrow_a) into the leg divider until they

click into place (arrow_b). To unfasten it, press the

round button in the centre of the buckle (arrow_c)

and pull the waist straps out (arrow_d).

17 To tighten the waist strap, pull on both sides in the

direction of the arrow (arrow_a). To loosen it do the

opposite. The waist strap can be tightened as far as

the safety lock (fig_b).

18 To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow_a) until

the buckles are released and insert them in the

backrest loops (arrow_b). Remove the shoulder straps

from the sack (arrow_c) and insert them in the most

appropriate loop (arrow_d), then re-attach the two

buckles on the rear of the backrest (arrow_e) The

buckles are securely attached when a click is heard

(fig_f).

19 HOOD: to attach the hood insert the connections

into the sides of the seat (fig_a) and then fasten the

buttons on the rear of the backrest (fig_b). To remove

the hood: disengage the connections and unbutton

from the backrest. To raise the hood: pull it towards

you; to close the hood: push it back. To convert the

hood into a sun canopy, open the double zipper

(fig_c) and unfasten the buttons on the rear of the

backrest. The child’s favorite toy can be hung from

the loop on the hood (fig_d).

20 COVER: Fit the cover on and fasten the buttons under

the leg rest (fig_a) and on the sides of it. For the baby

carriage version, raise the leg rest, put the cover over

the front bar (fig_b) and fasten it with the buttons on

the hood (fig_c).

21 For the stroller version, lower the footrest, insert the

cover underneath the front bar (fig_a) and secure it

according to the model purchased A, B.

22 Pliko Switch On Track COVER:: this can be used with

and attached to both the Navetta XL and the Pliko

Switch On Track stroller. To fit it on the Navetta XL,

consult its user manual. To fit it on the stroller, open

up the cover inside to make room for the child’s legs

(Fig. a). Put it into position. Cover the front bar, fasten

the buttons on the front (Fig. b) and insert it under

the leg rest (Fig. c).

23 RAIN CANOPY: position the rain canopy on the stroller

(fig_a) and insert the two lateral loops over the hood

buttons (fig_b).

24 Secure the rain canopy by attaching the elastic loop

to the rear uprights (fig_a) or to the front uprights

(fig_b), according to the seat position.

25 REAR LEDGE: the rear ledge makes it easier to

negotiate kerbs or level differences with the stroller

(fig_a) and can also be used to transport a second

child (fig_b). To use the stroller with two children,

apply the brakes, position the smaller child in the seat

and attach the safety harness (1). Grip the handles (2)

and help the second child to climb onto the ledge (3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Pliko Switch compact in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 3,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peg Perego Pliko Switch compact Manual

Product: