626292
13
Zoom out
Zoom in
Previous page
1/76
Next page
13
bassinet unit (fig_b).
Attachment in vehicles with safety belts
ATTACHING THE BASSINET UNIT IN VEHICLES: It is possible
to install the bassinet unit in cars if there are 3 rear seats
with 3 safety belts. The central one can be 3-point or a lap
belt.
We recommend positioning the bassinet unit on the
vehicle’s rear seats with the end for the childs head above
the central seat.
5• Car bassinet unit fitted in a vehicle with a lap belt.
6• Car bassinet unit fitted in a vehicle with a 3-point belt.
7• The Car bassinet unit can also be positioned in the centre
of a 3-person rear seat, using the two outer safety belts
(fig_a). It cannot be positioned as in fig_b because it can
only be secured in vehicles using safety belts that come
from opposite sides.
8• Position of the Car bassinet unit on a 2-person rear seat.
The Car bassinet unit can be positioned with the child’s
feet on either side of the vehicle. If the seat of the vehicle
inclines, towels can be used to provide a horizontal surface.
9• Take the rear seat belt, fold it as shown in the figure
(arrow_a) and insert it in the slot of the car kit's metal
fastener (arrow_b).
10• Insert the red lever on the metal fastener of the car kit
inside the folded belt (arrow_c).
Move the metal fastener as near as possible to the seat in
order to enable it to be fastened to the Carrycot (arrow_d).
11• Hook the car kit connector to the ring on the Carrycot and
pull firmly on the belt to ensure the Carrycot fits as well as
possible to the seat.
Repeat the same operations on the other side of the
Carrycot.
12• Car Carrycot installed in the car.
13• UNFASTENING THE CARRYCOT FROM THE CAR:
press the control button on the connector to loosen the
belts, as shown in the figure. Unhook the fastener of the
car kit connector from the ring on the Carrycot.
IMPORTANT: the car kit can remain fastened to the
seat belts of your car. The car kit fastener can easily be
attached to or removed from the ring on the Carrycot
(point 13).
IMPORTANT: do not leave the car kit fastened onto
the vehicle’s safety belt when this is being used by an
adult.
How to put the child in the Car
bassinet unit
14• 3-POINT SAFETY HARNESS: Slacken the straps by pressing
on the buckle (fig_a) and lengthen them (fig_b).
15• Press the red button (fig_a) and release the straps from the
leg divider (fig_b).
16• Place the child in the Car bassinet unit then buckle
together the straps and the leg divider.
17• The child must be securely fastened in the Car bassinet
unit. If the straps are loose, tighten them by pulling on the
end.
The straps must be as tight as possible to protect the child
in the event of an accident. Leave a minimal amount of
play (the width of a finger between the harness and the
child’s chest).
18• REMOVE THE STRAPS: To remove the straps from the shell
of the Car bassinet unit, pass the buckles of the leg divider
through the slots under the shell and pull them through
(fig_a). To remove the strap fasteners from under the shell,
release them from the clips and pass them through the
slots (fig_b).
19• Put the harness back in its pocket once it has been
removed.
Serial numbers
20• Information about the production date of Car bassinet unit
can be found under the base.
Product name, production date and serial number (fig_a).
Car Kit:
Approval label (fig_b).
Harness production date (fig_c).
In the event of problems with the product, these details
will be of use to customers.
Product cleaning
This product requires a small amount of maintenance.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peg Perego Kit auto at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Kit auto in the language / languages: All languages as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info