Manual Peg Perego Isofix-Base 0-1K (page 10 of 64) (All languages)

626177

Zoom out

Zoom in

1/64

with the child car seat against the vehicle seat

until they can go no further.

• IMPORTANT: It is possible to check that the

base is correctly positioned by looking at the

signals on the handle. OK (green) indicates that

the position is correct, NO (red) indicates that

the procedure has been carried out incorrectly

and must be repeated until the handle only

shows the term “OK”.

9• To release the child car seat from the base:

raise the handle to its transport position, push

the lever on the backrest upwards and at the

same time lift the seat.

10• To release the base from the vehicle seat:

release the Isofix connectors from the fixing

points in the car by lifting the handle on the

base (Arrow A) and pulling the base in the

normal direction of travel (Arrow B). Pull the

handle (Arrow C) and push the connectors back

inside the base (Arrow D). Rotate the support

leg and place it in its housing (Arrow E).

Connecting Viaggio1 Duo-Fix

and all its models

IMPORTANT: the car seat must be

attached without the child in it.

• Before connecting the car seat on the Isofix

base, ensure that the child car seat’s Isofix

connectors are fully extended (Arrow A).

• If you have any difficulty fitting car seat in your

car, lift up or remove the vehicle’s headrests.

11• Remove the plastic casing attached to the

child car seat with the special release switches

(Arrows B and C).

12• Position the child car seat on the Isofix Base

0+1 K and insert the rear connectors of the

child car seat in the fixing points of the base

nearest to the vehicle seat (Arrow A).

• Press the front part of the child car seat until it

clicks into place (Arrow B).

IMPORTANT: The two signals behind the

base go from red to green to indicate that the

child car seat is properly attached to the base.

13• Pull the handle on the base (indicated by

Arrow A) and push the base with the child car

seat against the vehicle seat until they can go

no further (indicated by Arrow B).

IMPORTANT: It is possible to check that the

base is correctly positioned by looking at the

signals on the handle. OK (green) indicates that

the position is correct, NO (red) indicates that

the procedure has been carried out incorrectly

and must be repeated until the handle only

shows the term “OK”.

IMPORTANT: Once the procedure is

complete, move the base to check that both

Isofix points are actually attached.

Serial numbers

14• On the underside of the Isofix Base 0+1 K,

near the isofix connectors, the following

information is provided: product name, date of

manufacture and serial number of the product

itself (Fig. a).

The approval label is located on the Isofix Base

0+1 K behind the compartment holding the

instruction sheet (Fig. b).

This information is required for any complaints.

Cleaning and maintenance

• This product requires a small amount of

maintenance. Cleaning and maintenance must

only be carried out by adults.

• Clean the plastic parts periodically with a

damp cloth. Do not use solvents or other

similar products.

• Protect the product from atmospheric agents:

humidity, rain or snow. Extended exposure to

sunshine can cause colour changes in many

materials.

• Store the product in a dry environment.

How to read the approval label

This paragraph explains how to read the

approval label (the orange label located in the

instruction sheet compartment).

• The terms SEMI-UNIVERSAL class E and class

A indicate the compatibility of the child car

seat with vehicles fitted with Isofix attachment

systems.

• The top of the label displays the trademark of

the manufacturing company and the name of

the product.

• The letter E in a circle indicates the European

approval mark and the number indicates the

country that issued the approval (1: Germany,

2: France, 3: Italy, 4: The Netherlands, 11: Great

Britain, and 24: Ireland).

• Approval number: if it starts with 04 this

indicates the fourth amendment (the one

currently in force) of Regulation R44.

• Reference standard: ECE R44/04.

• Production serial number: on issue of approval

each safety seat is personalized with its own

number.

PEG-PÉREGO S.p.A.

Peg-Pérego S.p.A. è certificata

ISO 9001. La certificazione offre

ai clienti e ai consumatori la

garanzia di una trasparenza e

fiducia nel modo di lavorare

dell'impresa. Peg Pérego potrà

apportare in qualunque momento modifiche

ai modelli descritti in questa pubblicazione,

per ragioni di natura tecnica o commerciale.

Peg Pérego è a disposizione dei suoi

Consumatori per soddisfare al meglio ogni loro

esigenza. Per questo, conoscere il parere dei

ns. Clienti, è per noi estremamente importante

e prezioso. Le saremo quindi molto grati se,

dopo aver utilizzato un ns. prodotto, vorrà

compilare il QUESTIONARIO SODDISFAZIONE

CONSUMATORE, segnalando eventuali

osservazioni o suggerimenti, che troverà nel

nostro sito internet: www.pegperego.com

Servizio assistenza

Peg-Pérego

Se fortuitamente parti del modello vengono

perse o danneggiate, usare solo pezzi di

ricambio originali Peg Pérego. Per eventuali

riparazioni, sostituzioni, informazioni sui

prodotti, vendita di ricambi originali e

accessori, contatta il Servizio Assistenza Peg

Pérego indicando, qualora fosse presente, il

numero seriale del prodotto.

tel. 0039/039/60.88.213

numero verde: 800/147.414

(contattabile da rete fissa)

fax 0039/039/33.09.992

e-mail assistenza@pegperego.it

sito internet www.pegperego.com

All intellectual property rights on the contents

of this manual are property of PEG PEREGO

S.p.A. and are protected by the laws in force.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Isofix-Base 0-1K in the language / languages: All languages as an attachment in your email.

The manual is 1,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peg Perego Isofix-Base 0-1K Manual

Product: