626121

Peg Perego Belted Base Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6
EN_English
Thank you for choosing a
Peg-Pérego product.
Product characteristics
•
IMPORTANT: The "Belted Base" may be
used with the following car seats: PRIMO
VIAGGIO SIP, PRIMO VIAGGIO TRI-FIX, PRIMO
VIAGGIO TRI-FIX K, PRIMO VIAGGIO SL.
•
IMPORTANT: "Belted Base" (Group
0+) must be fitted facing opposite to the
direction in which the vehicle normally
travels, on seats without an airbag. Do
not install "Belted Base" on seats that face
backwards or sideways.
•
Using "Belted Base" guarantees greater safety
and makes it easier to fit the car seat correctly.
•
"Belted Base" is attached to the car with the
vehicle’s seatbelt and can be left in the car
ready for the car seat to be fitted to it.
•
The car seat can be fitted on the front seat, if it
does not have an AIRBAG, or on the vehicle rear
seat. The child’s car seat must not be attached
to a car lap belt or a two point belt as they do
not secure the seat properly. The car seat can
only be attached to three-point seatbelts.
•
The car seat can easily be attached to the
"Belted Base" thanks to the “Ganciomatic
System”, which also allows you to attach the
car seat to Peg-Pérego strollers and chassis.
•
The car seat (Group 0+), has passed all of the
safety and type-approval tests required by
European standard ECE R44/04, for children
weighing from 0-13 kg (0-12/14 months).
WARNING
• Read the instructions carefully before use
and keep them in the holder provided for
future reference. Failure to closely follow
the installation instructions for the car
seat will put your child at risk.
• The assembly and installation operations
must be conducted by adults.
• Avoid inserting fingers into the mechanisms.
•
Install this group 0+ car seat base facing opposite
to the normal forward movement of the vehicle.
• Death or serious injury can result if this safety
seat base is installed on seats with airbags.
•
Eliminate danger by disabling airbags
surrounding the position of the car safety seat.
• In the case of rotating or movable seats it is
important to install the car seat base facing
opposite to the normal forward movement of
the vehicle.
• When travelling take special care to make
sure that luggage or other objects do not
injure the child in the car seat in the case of
accidents.
• Do not use installation methods different
from those indicated. This would result in the
risk of detachment from the seat.
• Group 0+, “Universal” base for car seat, type
approved in accordance with European
standard ECE R44/04 for children weighing
from 0-13 kg (0-12/14 months). Suitable for
the majority of seats in vehicles, but not all.
• The car seat base can be correctly installed if
in the vehicle’s use and maintenance manual
is stated that it is compatible with “Universal”,
group 0+ holding systems.
• This car seat base is classified “Universal”
according to stricter type-approval criteria
than previous models which do not have a
type-approval label.
• This car seat base can only be used on
approved vehicles which have static or
inertia-reel three-point seatbelts and are
approved according to UN/ECE regulation
no.16 or equivalent standards. Two-point
belts or lap belts must not be used.
• To install the base with the car seat, pass
the vehicle’s three-point seatbelt through
the appropriate fittings, which are light-blue
coloured. Do not use installation methods
which are different from those indicated as
there is a risk that the base could become
detached from the vehicle’s seat.
• Make sure that the vehicle’s three-point
seatbelt for attaching the base and the car
seat is always taut and not twisted. It should
be replaced if it undergoes excessive stress in
an accident.
• If you are unsure of anything, contact the
manufacturer or the retailer of this car seat.
• Do not remove the stickers; this could mean
that the product no longer conforms with the
standards.
• Do not use this car seat base if it is broken or
has missing parts, if it is second-hand or if it
has undergone violent stress in an accident,
as it may have extremely dangerous structural
damage.
• Do not modify the product.
• For any repairs, replacement parts or
information on the product, contact the post
sales assistance service. Details can be found
on the last page of this manual.
• Do not use this car seat base after 7 years
from the production date indicated on
the structure. Due to natural ageing of the
materials, it may no longer conform to the
standards.
Instructions for use in vehicle
• Place the base on the vehicle's rear seat, with
the anti rebound bar leaning against the
backrest.
WARNING: once screwed on, the anti
rebound bar must never be removed as it
forms an integral part of the product.
1• Pull the seatbelt’s waist strap through the
two side routers of the base, making sure it
is taut, and fasten the seatbelt to the seat as
shown.
2• Place the car seat on the base in a rear
facing position.
• To fasten the car seat to the base, press down
on the product until it clicks into place.
• Place your child in the car seat,
remembering to secure him or her with the
safety harness.
3• Take the vehicle's seatbelt and pull it behind
the car seat's backrest. Slide it through
the routers on the rear of the backrest and
make sure it is taut, as shown.
4• To release the car seat from the base, you
must: release the vehicle's seatbelt and
remove it from the routers on the rear of the
backrest;
5• press the lever on the car seat's backrest
upwards and simultaneously lift the car seat.
The base remains fastened on the vehicle's
seat, ready for use.
Serial numbers
6• The following information can be found
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peg Perego Belted Base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Belted Base in the language / languages: All languages as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info