564337
7
Zoom out
Zoom in
Previous page
1/40
Next page
ENGLISH
7
PV
®
SERIES PROFESSIONAL STEREO POWER AMPLIFIER
INTRODUCTION
Congratulations! You have just purchased the world’s finest professional power amplifier. The PV amplifier
features a two-way crossover and sub-sonic (low-cut) filter for each channel. Crossover frequencies are fixed
at 150 Hz, allowing subwoofers to be driven at extremely high sound pressure levels, and the filters cut at
40 Hz to prevent low-end rumble. Using proven technology gained through years of amplifier design, this unit
takes advantage of rugged TO-3P output devices mounted on massive aluminum extrusions and dissipates
heat via an extremely quiet and effective two-speed fan. PV amplifiers employ mammoth toroidal power
transformers and offer impressive specifications and features not found on similarly priced competitive units.
This amp is designed to drive a 2-Ohm load per channel, thus achieving awesome performance levels into
4 Ohms in BRIDGE mode. PV amplifiers are ruggedly constructed, rack-mountable pieces of gear with
superb patching capability, allowing superior flexibility in application. Front panel features include calibrated,
detented gain (dB) controls and LED indicators for power (PWR), signal presence (SIG), and DDT
(Distortion Detection Technique) activation on each channel, as well as a rocker mains POWER switch. The
back panel contains an IEC connector for the mains power cord, a mains circuit breaker with reset, and the
critical cooling fan opening. This opening should have an adequate supply of cool air and should never be
blocked or restricted. Also on the back panel are the input and output sections, including an input barrier strip
for permanent installations. Each channel input section includes a combo XLR / 1/4" phone jack connector,
THRU/LOW out and HIGH out 1/4" jacks, and activation switches for the LOW CUT filter and crossover
(150 Hz XOVER). Channel output sections feature dual shock-proof binding posts and four-conductor
Speakon
®
connectors. An additional four-conductor Speakon connector allows BRIDGE mode output.
UNPACKING
Inspect the amplifier during unpacking. If any damage is found, notify your dealer immediately. Be sure to
save the carton and all packing materials. Should you ever need to ship the unit back to Peavey Electronics,
one of its service centers, or the dealer; use only the original factory packing.
INSTALLATION
PV professional power amplifiers are designed for durability in commercial installations and provide the
quality performance required in studio and home applications. They are two-rack-space units of 16" (406 mm)
depth designed to mount in a standard 19" rack. Rear mounting ears are provided for additional support. The
minimum rack depth required from the mounting surface is 17" (432 mm) to allow adequate connector
clearance.
BASIC SETUP
Rack mount the amplifier in the location where it is to be used, remembering to allow for adequate access
and cooling space. Make all the connections to the proper INPUT connectors on the desired channel. Select
the proper mode configuration (STEREO or BRIDGE). Connect speakers to the proper OUTPUT connectors,
reviewing carefully the impedance and phase considerations. With the POWER switch OFF, connect the IEC
cord (7) to the amplifier and then to a suitable electrical outlet to allow proper current draw. With both channel
gain (dB) controls at their fully counterclockwise (-) settings, turn the POWER switch to ON, and slowly
raise the gain controls to desired settings. Please carefully review this manual. It covers all this information in
greater detail.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavy PV 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavy PV 900 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info