564372

Peavy Nashville 112 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
6
MMaasstteerr GGaaiinn ((1100))
The Master Gain controls the overall volume level of the amplifier. The final adjustment to this control should be
made after the desired sound/tone has been achieved.
PPoowweerr LLEEDD ((1111))
The Power LED illuminates when power is supplied to the amp. If this LED is lit, the amp is on.
RReeaarr PPaanneell
((1122)) PPoowweerr SSwwiittcchh
Placing this switch in the “On” position will result in power being supplied to the unit. The Power LED (11) will
illuminate when the amp is on.
((1133)) PPoowweerr AAmmpp IInn
This mono 1/4" jack provides an input to the power amplifier. When used in conjunction with the Preamp Out jack
(14), an effects loop is formed allowing the use of external equalizers and effects.
((1144)) PPrreeaammpp OOuutt // CCDD IInnppuutt
This mono 1/4" jack provides an output from the preamp. When used in conjunction with the Power Amp In jack
(13), an effects loop is formed allowing the use of external equalizers and effects. This jack can also be used to
connect the output of a CD or tape player to the power amp for “play along” practicing. A shielded stereo cable
should be used to connect to the CD input.
((1155)) LLiinnee OOuutt
The Line Out XLR jack offers you a balanced, low impedance output to go to a mixing board or snake. This can
help to eliminate mics on stage as well as loud levels. This results in less chance of feedback as well. Use quality
mic cables to make this patch.
((1166)) HHeeaaddpphhoonnee JJaacckk
A headphone jack is provided for stereo headphones. This switching jack disengages the internal speaker when
plugged in.
((1177)) RReemmoottee SSwwiittcchh
This jack is provided for the connection of the optional footswitch (part #90001791). The footswitch is a multi-
function type, allowing you to to defeat the Reverb and/or the Post EQ Patch loop. To use the footswitch, insure
that the footswitch plug is inserted fully into the jack.
RReemmoovvaabbllee AACC PPoowweerr CCoorrdd
This receptacle is for the IEC line cord (included), which provides AC power to the unit. Connect the line cord to
this connector and to a properly grounded AC supply. Damage to the equipment may occur if an improper line
voltage is used (see voltage marking on unit). Never remove or cut the ground pin of the line cord plug. This unit
is supplied with a properly rated line cord. When lost or damaged, replace this cord with one of the proper ratings.
12 13 14 15 16 17
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavy Nashville 112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavy Nashville 112 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info