564342

Peavy IPR2 5000 Manual

32
Zoom out
Zoom in
Previous page
1/44
Next page
32
The Horn EQ provides a 6dB per octave high frequency boost
that is sometimes required for high frequency horns. The
frequency control sets the low frequency corner of the filter.
To return to the Main Menu, select Discard and Exit or Save
and Exit.

Limiter
Memory

Delay can be used to align drivers within a loudspeaker or to
delay auxiliary speakers like those installed under a balcony. A
short delay can also be used to delay the main speakers to align
them with the drums or bass guitar. A total of 125 mS of delay
is available on each channel. 5 mS of delay is available in 41.67
uS steps for driver alignment. 120 mS is available in 1 mS steps
for system alignment. These delays can be set independently
so that the driver alignment offset can be maintained when the
system alignment delay is adjusted.
The first screen in the delay Sub Menu allows the user to
decide whether the delays will be set independently or B=A.
This selection only applies to the 1 mS step system delay,
leaving the driver alignment delays to be set independently.
The IPR2
™
amplifiers display the equivalent delay distance in
meters and feet in the system delay and centimeters or inches
in the driver delay.


The IPR2 DSP has limiters available on each channel. These
limit the signal level to the input of the power amplifier stage.
The limit threshold starts at zero and is adjusted in -1 dB
steps, reducing the maximum output. You must be aware that
the IPR2 DSP works the same as most other amplifiers in that
their maximum output depends on the line voltage and load
impedance. Depending on load, you may need to reduce the
limiter up to 3 dB before the output is reduced.
The IPR2 has four memory locations where its settings can be stored and then recalled. Each location has a six-character name to
identify the file. The name of the active preset is also displayed in the Main Menu “Memory” screen.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavy IPR2 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavy IPR2 5000 in the language / languages: English as an attachment in your email.

The manual is 22,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info