564340

Peavy IPR2 2000 Manual

106
Zoom out
Zoom in
Previous page
1/116
Next page
IPR2
™
3000 Specification Sheet
Rated Power 2ch x 2 ohms 1750 watts 20ms repetitive burst / 1450 watts 1% THD both ch. driven @ 1kHz.
Rated Power 2ch x 4 ohms 950 watts 20ms repetitive burst / 900 watts 1% THD / 815 watts 0.2% THD, both ch. driven @ 1kHz.
Rated Power 2ch x 8 ohms 525 watts 20ms repetitive burst / 500 watts 1% THD / 430 watts 0.15% THD, both ch. driven @ 1kHz.
Minimum Load Impedance 2 ohms
Maximum RMS Voltage Swing 70 volts
Frequency Response 20 Hz - 22 kHz; +/-.05dB @ 4 ohms
20Hz - 20kHz 2ch x 2 ohms <0.15% @ 1,200 watts 20 Hz to 3 kHz, decreasing to 1,100 watts @ 20 kHz, both ch. driven.
20Hz - 20kHz 2ch x 4 ohms <0.15% @ 650 watts 20 Hz to 20 kHz, both ch. driven.
20Hz - 20kHz 2ch x 8 ohms <0.15% @ 375 watts 20 Hz to 20 kHz, both ch. driven.
Input CMRR > - 76 dB @ 1 kHz.
Voltage Gain x 75 (+37dB)
Crossover 100 Hz switchable 2nd order High pass and 3rd order Low Pass per ch.
Crosstalk > -68 dB @ 1 kHz @ 400 watts @ 8 ohms.
Hum and Noise > -101.5 dB, “A” weighted referenced to rated power @ 4 ohms.
Slew Rate > 12V/μs
Damping Factor (8 ohms) > 215:1 @ 20 Hz - 1 kHz @ 8 ohms
Input Sensitivity 0.775 volts +/- 3% for 1 kHz 4 ohm rated power, 0.730 volts +/- 3% for 1 kHz. 2 ohm rated power
Input Impedance 15 kilohms, balanced and 7.5 kilohms unbalanced.
Current Draw @ 1/8 in VA (watts) 960 (535) @ 2 ohms, 615 (315) @ 4 ohms, 400 (200) @ 8 ohms
Current Draw @ 1/3 in VA (watts) 2065 (1360) @ 2 ohms, 1215 (735) @ 4 ohms, 740 (420) @ 8 ohms
Idle Consumption 160VA, 75 watts
Cooling Temperature dependent variable speed 80 mm DC fan.
Controls 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F.
Indicator LEDs Five LED indicators per channel: Active, Signal, DDT
™
, Temperature and DC
Protection Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors Dual combination 1/4” XLR, dual male XLR input thru, two twist lock connectors
Construction 0.062” aluminum
Dimensions 3.5”x19”x 10.5” behind front panel + 0.6” for handle
Net Weight 5.62 kg (12.4 lbs.*)
Gross Weight 6.80 kg (15.0 lbs.)
Rated power readings made with BW: <10 Hz to 22 kHz. All power measurements made @ 120 VAC or 240VAC.
2 ohm steady state sine wave power is time limited by circuit breaker and AC limitations.
*Net Weight does not include power cord.
… 106 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavy IPR2 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavy IPR2 2000 in the language / languages: English as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info