564347
57
Zoom out
Zoom in
Previous page
1/68
Next page
57
8
9
10
11
12
13
SPEAKER OUTPUTS
这两个并联的1/4”单声道插孔(TS)用来连接扬声器机箱。同样,扬声器的最小匹
配阻抗为4欧姆。CABINET IMPEDANCE SWITCH(23)(音箱阻抗开关)的设置应与
连接的扬声器负载相匹配。
LINE OUT LEVEL
此控制钮设定由LINE OUT(26)(线路输出)插口发送的信号电平。可用于平衡由
LINE OUT(26)(线路输出)驱动的从属功放/扬声器至SPEAKER OUTPUTS(24)
(扬声器输出)驱动的音箱的电平。
LINE OUT
此1/4”单声道插孔(TS)提供一个前置功放信号,在保障放大器音质的同时驱动另
一台功放/扬声器系统。
FUSE
熔断器位于熔断器座的盖子中。此熔断器必须用相同类型和相同电流值的熔断器来
替换,以避免损坏放大器并使保修无效。如果放大器的熔断器反复烧断,应将放大
器拿到指定的服务中心进行维修
警告:只有拔掉电源线后方可替换FUSE(熔断器)。
GROUND POLARITY 开关
此三位摇臂开关通常应设在中心(o)的位置。如果扬声器音箱有哼声或噪音,可以
将开关拨到“+”或“-”的位置,尽量降低哼声/噪音。如果改变电源极性不能纾
缓问题,请咨询指定的Peavey经销商,Peavey工厂,或合格的维修技师。
IEC (国际电工委员会)电源输入接口
此为标准的IEC(国际电工委员会)电源输入接口。在包装盒内包括有相应AC插头和
额定操作电压的AC电源线。该电源线应先和放大器相连后方可接到适当的AC电
源插座上。
美国国内AC电源线
本机配置的电源线为耐用的3芯线,带有接地脚的传统120伏AC插头。如果使用的
电源插座没有接地脚,则应使用相应的接地转换器,并将第三根导线正确接地。
千万不要折断任何设备上的接地脚。这是为了您的安全起见。
7
11
10 12 13
8 9
6
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavy 3120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavy 3120 in the language / languages: English as an attachment in your email.

The manual is 16,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info