564368
28
Zoom out
Zoom in
Previous page
1/32
Next page
TUBE COMPLEMENT & FUNCTIONS:
For best performance, use only tube types specied.
V1 = 12AX7/ECC83/7025
A-Input gain stage
B-2nd gain stage/Overdrive boost
V2 = 12AX7/ECC83/7025
A-Low & High make-up gain/Mid driver
B-Compressor/Graphic EQ driver
V3 = 12AT7/ECC81
A-Graphic EQ return/Effects Send driver
B-Effects return/Preamp Out driver
V4 = 12AX7/ECC83/7025
A-Power Amp input make-up gain/driver
B-Split-load phase inverter
V5 = 12AT7/ECC81
A-"Push" follower for power tube drive
B-"Pull" follower for power tube drive
V6-V13 = EL34/6CA7 (6L6GC Optional) Output tubes
POWER AMP SECTION
Rated Power & Load:
300W (rms) into 2, 4, or 8 Ohms (selectable impedance)
POWER AMP INPUT SENSITIVITY:
3.0V (rms) / / 10dBv @ ~500k Ohms
HUM & NOISE:
Greater than XXdB below rated power
POWER CONSUMPTION:
1000W (rms) @ 100-240VAC; 50-60Hz
PREAMP SECTION:
The measurements were made at the following settings, un-
less otherwise noted:
-Volume=5
-Overdrive=0
All front panel switches=OUT
Low/Mid/High=5
Mid Shift=450Hz
Graphic Sliders=0
Master=5
Resonance=0
Presence=0
PREAMP INPUT SENSITIVITY (NOMINAL):
3.0V(rms) / 10dBV @ 4.0Meg Ohms
0.18V(rms) / -5.0dBV @ 100k Ohms (15dB pad engaged)
COMPRESSION RATIO:
Unity to XX:XX (variable)
ROTARY LOW/MID/HIGH EQ:
Low & High shelving Baxandall circuit
Low corner frequency=XXHz
High corner frequency=XXHz
Mid (cut only) frequency centers @200, 450, 600 or 800 Hz
GRAPHIC EQ:
Nine constant-Q lters with +/-15dB cut or boost
Centers at 40, 63, 100, 160, 250, 400, 800, 1.6k and 3.2kHz
EFFECTS LOOP SENSITIVITY:
Send=0.90V(rms)/-1.0dBV@~80k Ohms
Return=0.90V(rms)/-1.0dBV@~1Meg Ohms
PREAMP OUT SENSITIVITY:
3.0V(rms)/10dBV@~80kOhms
XLR LINE OUT (LEVEL @ 12 O'CLOCK):
75 Ohms, electronically balanced
Pre EQ Send=XXmV(rms)/-XXdBV
Post EQ Send=XXmV(rms)/-XXdBV
FOOTSWITCH FUNCTIONS:
Channel Select, Compression, Graphic EQ, Mute
DIMENSIONS & WEIGHT:
11.25"H x 22.50"W x 11.25"D
37.0 lbs.
VB-3
Specifications
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavey VB-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavey VB-3 in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info