783298
14
Zoom out
Zoom in
Previous page
1/87
Next page
ENGLISH
14
Mounting soundbar on the wall
Drill 4 holes (Ø 3-8 mm each according to
wall type) with correct distances. Insert wall
plugs into the drilled holes (use a hammer if
necessary) fix the brackets with the 4 screws.
Make sure that you fix the brackets the right
way round.
Unscrew the two screws on the back and
screw in the supplied flat head screws firmly.
Plug the power cords into the AC~ power
connections of the soundbar and subwoofer.
Plug the desired audio transmission cable into
the corresponding socket on the back of the
soundbar.
Note: If the soundbar is to be attached to a
wall and connected via an HDMI cable, you will
need an HDMI cable with an angled plug.
Now attach the soundbar onto the brackets.
Make sure both screw heads are properly
seated in the holes.
Operation
Turn on the soundbar by pushing on / o
button at the device or at the remote control.
A blue, green or orange LED turns on.
Bluetooth®
To play via Bluetooth®, press the BT button on
the remote control or the mode selection button
at the on-state soundbar until bt is shown in
display.
Turn on the Bluetooth® connection on the
playback device and search for devices.
Connect (pair) your playback device to the
Soundbar labelled PSB 400. If the connection is
successful, an acoustic signal (“paired”) sounds.
Future use of the same player will automatically
connect to the soundbar when the Bluetooth®
feature is enabled on both devices. Start
playback.
If supported by your playback device you can
operate the functions play / pause , skip
forward and back using the remote
control.
Audio input
Press the mode selection button at the on-state
soundbar or the AUX, BT, USB, OPT/COA,
HDMI1/2 or HDMI eARC button to activate
audio input. The current audio input mode is
shown in display.
Adjust the volume on the playback device or
with the volume buttons - / + on the remote
control in 32 steps.
Mute the soundbar with the mute button if
necessary.
Switch the soundbar to standby mode with
the on / o buttons at the device or remote
control. The selected input is retained when it is
switched on again.
Cleaning and care
Pull the power plug from the electrical outlets
before cleaning.
Clean the exterior with a lightly damp cloth.
Do not use petrol, alcohol or other abrasive
cleansers to clean the exterior.
Do not allow liquids to spill into any openings.
Use the original packaging if it is necessary to
transport the unit.
Declaration of conformity
Hereby, Imtron GmbH declares that the radio
equipment type PSB 400 is in compliance
with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the
following internet address:
http://www.peaq-online.com/nc/suche/
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PSB 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PSB 400 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info