783297
15
Zoom out
Zoom in
Previous page
1/88
Next page
ENGLISH
15
Mounting soundbar on the wall
Drill 4 holes (Ø 3-8 mm each according to
wall type) with correct distances. Insert wall
plugs into the drilled holes (use a hammer if
necessary) fix the brackets with the 4 screws.
Turn the supplied screws into the threads on
the brackets.
Insert the DC plug into the DC IN socket on the
back of the soundbar. Plug the desired audio
transmission cable into the corresponding
socket on the back of the soundbar.
Note: If the soundbar is to be attached to a
wall and connected via an HDMI cable, you will
need an HDMI cable with an angled plug.
Now attach the soundbar onto the brackets.
Make sure both screw heads are properly
seated in the suspension eyes.
Operation
Turn on the soundbar by pushing on / o
button at the device or at the remote control.
Bluetooth®
To play via Bluetooth®, press the BT button on
the remote control or the mode selection button
at the on-state soundbar until mode selection
button is flashing blue.
Turn on the Bluetooth® connection on the
playback device and search for devices.
Connect (pair) your playback device to the
Soundbar labelled PSB 150. If the connection
is successful, the mode selection button is
from blue flashing to steady on. Future use of
the same player will automatically connect to
the soundbar when the Bluetooth® feature is
enabled on both devices. Start playback.
If supported by your playback device you can
operate the functions play / pause , skip
forward and back using the remote control.
Audio input
Press the mode selection button at the on-state
soundbar or the ARC, BT, AUX, USB or OPT
buttons at the remote control to activate audio
input. The selected input mode is displayed by
color by the mode selection button (Bluetooth®:
blue flashing / permanent, AUX: turquoise,
ARC: red, optical: white, USB: green) or can be
queried by pressing the voice output button on
the soundbar.
Adjust the volume on the playback device or
with the volume buttons - / + in 32 steps.
Mute the soundbar with the mute button if
necessary.
Switch the soundbar to standby mode with
the on / o buttons at the device or remote
control. The selected input is retained when it is
switched on again.
Cleaning and care
Pull the power plug from the electrical outlets
before cleaning.
Clean the exterior with a lightly damp cloth.
Do not use petrol, alcohol or other abrasive
cleansers to clean the exterior.
Do not allow liquids to spill into any openings.
Use the original packaging if it is necessary to
transport the unit.
Declaration of conformity
Hereby, Imtron GmbH declares that the radio
equipment type PSB 150 is in compliance
with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the
following internet address:
http://www.peaq-online.com/nc/suche/
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PSB 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PSB 150 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info