783295
21
Zoom out
Zoom in
Previous page
1/87
Next page
Size = A5
21
ENGLISH
Operation
TURNING THE UNIT ON
Press the button to switch on the unit.
ADJUSTING THE ANTENNA
For optimal reception, extend the antenna,
move to fully extend and adjust it.
ADJUSTING THE VOLUME
The volume can be adjusted during play-
back with the volume control.
Time settings
The time can only be set in standby mode:
1. Press the EQ/CLOCK button for ap-
prox. 2 seconds. Select a time format
(24/12 hrs) with the / button
and confi rm with EQ/CLOCK button.
2. The time (hr) appears ashing on the
display. Set the time (hr and min) with
/ button and confi rm each with
EQ/CLOCK button.
Mode
Press to select between:
USB
TUNER
AUX IN
BT
DISC
You can also enter the mode directly with
the remote control.
Radio mode
1. Press on the product or FM on the
remote control to select Radio mode.
The display shows “TUNER”.
2. The radio changes to the last selected
station.
FREQUENCY SETTINGS
Set an FM radio station:
Manual frequency setting
Push the button TUNE-/TUNE+ to
change the frequency in 0.05 MHz steps.
Automatic frequency searching
Press and hold the button TUNE-/
TUNE+, the searching will be started
and stops when an active channel has
been found.
SAVING FM RADIO STATIONS
You can save a maximum of 40 preset FM
radio stations.
Automatic saving
Press and hold the button AUTO on the
remote control and all available stations will
be saved.
Manual saving
1. Set the desired FM station.
2. Press the PROG button and select a
memory preset with the / but-
ton.
3. Confi rm your selection with the PROG
button.
4. The preset number of the saved station
is shown.
FM RADIO STATION SELECTION
Press the / button to call up a pre-
set channel.
Note:
Use RDS button in FM mode: Switches
between receiving frequency / Program
Service (Station Name) / PTY (Program
Type), radio text and CT (clock time), if the
station supports these functions and the
radio reception is adequate.
CD-mode
1. Press CD button on the remote control
to enter the CD mode.
2. Press the button to open the CD
tray.
3. Insert a CD with the label facing up.
4. Press the button to move back and
close the CD tray.
5. The playback will be started automati-
cally.
USB mode
1. Insert an USB Stick with MP3/WMA-
music les.
2. Press on the product or USB on
the remote control to call up the USB
mode.
3. Playback starts automatically and the
rst track will be played. If there is no
USB device connected, the message
NO USB device found will be dis-
played on the screen.
Note
Connect the USB device directly to the
USB port of the unit. Using an extension
cable is not recommended and may cause
interference and failure of data transfer.
This product supports USB 1.1 and 2.0 up
to 32GB with fi le system FAT16 and FAT32.
IM_PMS210BT-B_170920_A_V04_HR.indb 21 20/9/17 12:02 pm
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PMS210BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PMS210BT in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info