783306
14
Zoom out
Zoom in
Previous page
1/86
Next page
Size = A5
ENGLISH
14
Cleaning and Care
Always unplug the power supply from the power
outlet before cleaning.
Caution! Water must not enter the device.
Clean the housing with a slightly damp cloth.
Clean the display with special screen cleaning
cloths. Always check the instructions of the
cleaning agent. Certain agents might not be
suitable for cleaning this product.
Do not use any sharp, abrasive or aggressive
cleaning agents.
Do not use any chemicals (e.g. gas, alcohol) to
clean the housing.
Disposal
Do not dispose of this appliance as unsorted
municipal waste. Return it to a designated
collection point for the recycling of WEEE.
By doing so, you will help to conserve resources
and protect the environment. Contact your retailer
or local authorities for more information.
Select input
1. With the monitor turned on, push the
multifunction switch to the right.
2. Select the desired input, HDMI or VGA by
pressing the multifunction switch up/down.
3. Confirm the selection by pressing the
multifunction switch to the left.
FreeSync
The “freesync” function can reduce blurring,
ghosting and juddering, and can also reduce lag
with videos, games and any other fast-moving
content.
To activate the “Freesync” function, the computer
display card required to fulfill one of the below
minimum requirements:
1. AMD APU and independent video card can
support this function;
2. NVIDIA video card can only be supported by
DP 1.2 port using NVIDIA GeForce 10 Series
or above.
Set picture characteristic
1. With the monitor turned on, press the multi-
selector switch up until the desired characteristic
has been set. You can choose from:
FPS Gaming
Low blue light mode
Movie mode
Reading mode
RTS Gaming mode
Standard mode
2. Confirm the selection by pressing the
multifunction switch to the left or wait a few
seconds until the symbol disappears.
IM_PMO-S241_S271-IFC_201127_V03_HR.indb 14IM_PMO-S241_S271-IFC_201127_V03_HR.indb 14 27/11/2020 11:21 AM27/11/2020 11:21 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PMO S271-IFC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PMO S271-IFC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info