783305
13
Zoom out
Zoom in
Previous page
1/86
Next page
ENGLISH
13
General settings
MENU SETTINGS
With the device switched on, press the multifunction
switch to the left. The main menu opens. Press
the multifunction switch up or down to select the
desired submenu. To confirm your selection, press
the multifunction switch again to the left. You can
change the settings by pressing the multifunction
switch up or down. Confirm the setting by pressing
the multifunction switch again to the left.
By pressing the multifunction switch to the right,
you return to the corresponding upper menu.
To close the main menu, press the multifunction
switch to the right until it closes.
The following main menu options are available:
Luminance
> Brightness
> Contrast
> Eco Mode
> DCR
> Overdrive
Image Setup
> H. Position
> V. Position
> Clock
> Phase
> Image Ratio
Color Setup
> Color Temp.
> Red
> Green
> Blue
OSD Setup
> Language
> H. Position
> V. Position
> Timeout
> Transparence
Reset
> Auto Config.
> Auto Color
> Reset
> O Timer
Extra
> Input Select
> Volume
> Freesync
Set menu language
The menu may be preset to English.
For easy use of the self-explanatory menu, it is
advantageous to set it to the respective native
language. Proceed as follows:
1. With the monitor turned on, press the multi-
selector switch to the left.
2. Select the OSD Setup item by pressing the
multi-selector up / down. Confirm the selection
by pressing the multifunction switch to the left.
3. The first point is Language. Press the
multifunction switch to the left to enter the
language selection menu.
4. Select the desired language by pressing the
multi-function switch up / down. Confirm the
selection by pressing the multifunction switch
to the left.
5. The desired language is now set. To exit the
menu, press the multifunction switch several
times to the right.
Reset settings to factory settings
1. With the monitor turned on, press the
multifunction switch to the left.
2. Select the Reset menu item by pressing the
multifunction switch up / down. Confirm the
selection by pressing the multifunction switch
to the left.
3. If necessary, select Reset by pressing the
multi-function switch up / down. Press the
multifunction switch to the left to confirm the
reset. All previously made individual settings
have now been reset and the menu is closed.
Change image format
1. While the monitor is on, press the multifunction
switch down until the desired format is selected.
You can choose between 4:3 and 16:9.
2. Confirm the selection by pressing the
multifunction switch to the left or wait a few
seconds until the symbol disappears.
IM_PMO-S241_S271-IFC_201127_V03_HR.indb 13IM_PMO-S241_S271-IFC_201127_V03_HR.indb 13 27/11/2020 11:21 AM27/11/2020 11:21 AM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PMO S241-IFC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PMO S241-IFC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info