783300
11
Zoom out
Zoom in
Previous page
1/86
Next page
ENGLISH
11
Refer all servicing to an authorised service agent.
Do not attempt to repair the product yourself.
Servicing is required when the product has been
damaged in any way, such as the supply cord
or plug are damaged, liquid has been spilled,
objects have fallen into the product, the enclosure
is damaged, the product has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Before connecting the product to a socket outlet,
make sure the voltage indicated on the product
corresponds to your local mains.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid hazard.
Regularly check if the supply cord, product or
extension cable is defective. If found defective, do
not put the product into operation. Immediately
pull the plug.
Place the supply cord and, if necessary, an
appropriate extension cable in such away that
pulling or tripping over it is impossible. Do not
allow the supply cord to hang down within easy
reach.
Do not jam, bend or pull the supply cord over
sharp edges.
The power plug is used as the disconnect
device; the disconnect device shall remain readily
operable. To completely disconnect the power
input, disconnect the mains plug.
The product may not function properly or not
react to the operation of any control due to
electrostatic discharge. Switch o and disconnect
the product; reconnect after a few seconds.
Protect the supply cord from being walked on
or pinched particularly at the plug, convenience
receptacles and the point where it exits from the
product.
Never pull the plug by the supply cord or with
wet hands.
Disconnect the power plug in case of faults
during use, during lightening storms, before
cleaning and when not using the product for a
longer period of time.
Danger! Before cleaning, switch the product o
and disconnect the power plug from the socket.
When the product has reached the end of its
service life, make it defective by disconnecting
the plug from the socket and cutting the cord in
two.
Intended use
This product is designed as a monitor only.
For sound playback additional headphones or
speakers, possibly with its own power supply, are
required.
The product is not intended for any commercial
or industrial use. Do not use it for other purposes.
Any other use might lead to damage of the product
or personal injury.
The Imtron GmbH assumes no liability for damage
to the product, for property damage or for personal
injury due to careless or improper usage of the
product, or usage of product which does not meet
the manufacturer’s specified purpose.
IM_PMO-B240-VFC_210817_V03_HR.indb 11IM_PMO-B240-VFC_210817_V03_HR.indb 11 18/8/2021 11:5318/8/2021 11:53
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PMO B240-VFC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PMO B240-VFC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info