783290

Peaq PDR180BT Manual

15
Zoom out
Zoom in
Previous page
1/107
Next page
ENGLISH
15
DAB RADIO
When the radio is switched on for the first time, it will
automatically do a full scan of DAB/DAB+ stations.
The list of stations is then stored, eliminating the
need for another full scan when the radio is turned
on the next time.
When the scan is complete, the stations are stored
in alphabetical order. The first available station will
be played back.
Note
If there is no DAB reception at any time, change
the position of the unit or adjust the antenna. Press
Scan to start a new search.
Changing DAB/DAB+ stations
1. Turn the Tune dial to navigate available DAB/
DAB+ stations.
2. To confirm, press Select.
Storing DAB stations
Press and hold the button Menu in DAB mode until
“Full scan” appears on the display. Press Select
to confirm.
The unit scans all available DAB/DAB+ stations
and plays the first available station.
Note
New stations and services are added to the stored
DAB/DAB+ stations. In order to make new DAB/
DAB+ stations and services available on your ra-
dio, run a full scan at regular intervals.
Displaying station information
1. Select a DAB station.
2. During DAB/DAB+ radio playback, press Menu
repeatedly to display the following information
(if available):
• Radio station name
• Frequency
• Signal frequency error
• Audio state and bit rate
• Time
• Date
• Radio text
• Signal strength
• Programme type
Storing DAB stations
You can store up to 30 preset DAB/DAB+ stations.
1. Select the desired station.
2. Press and hold Preset until “Preset store” is
shown on display.
3. Turn the Tune dial to preset a number from
1-30. Press Select to confirm the selection.
4. The preset number of the stored station is dis-
played.
5. Repeat steps 1 to 4 to store more DAB/DAB+
stations.
Selecting preset DAB stations
1. Press Mode to select DAB/DAB+ stations.
2. Press Preset to access the Preset menu.
3. Turn the Tune dial to select a preset number
and confirm your selection by pressing Select.
Using the DAB/DAB+ menus
In DAB mode press Menu until display shows [Full
scan] and use Tune to browse the menu options.
To confirm your selection press Select every time.
• [Full scan]
Searches for all available DAB/DAB+ stations.
• [Manual tune]
Manual tuning adjustment, for example align-
ing the antenna or adding stations.
• [Prune]
Removes all invalid stations from the station
list.
• [System]
System setting
FM RADIO
Selecting FM stations
1. Press Mode to select FM stations.
2. The radio plays the last station selected.
Selecting FM station frequencies
1. Select a FM station.
2. Manual frequency selection.
Turn the Tune dial to change the frequency at
intervals of 0.05 MHz.
3. Automatic frequency selection.
Press Select and the radio will stop searching
once an active station has been found.
IM_PDR180BT-B_190617_V05_HR.indb 15 17/6/2019 18:46
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PDR180BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PDR180BT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 8.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info