724343

Pattfield PE-ARM 36 Li Manual

290
Zoom out
Zoom in
Previous page
1/310
Next page
GB
- 290 -
Fitting the wheels (Figures 3a, b and 4)
Take the rear wheels (Figure 2/Item11) and mount them on the axle
as shown in Figure 3a. Then slide the washer (Figure 2/Item 23) onto
the axle and fasten all parts with the supplied split pin (Figure 2/Item
22) as shown in Figure 3b. Finally, press the wheel caps (Figure 2/
Item 10) onto the wheels (Figure 4).
Mounting the push bar (Fig. 5 to 10)
First take the spring (Figure 2/Item 16) and the handlebar mount (Fi-
gure 2/Item 12) and mount them on the relevant axle (Figure 5). Now
insert the push bar holder (Figure 2/Item 3) into the handlebar mount
(Figure 2/Item 12) and secure with the quick clamping function (Figu-
re 2/Item 17) (Figure 6).
The top push bar (Figure 1/Item 2) must be pushed onto the push
bar holders (Figure 2/Item 3) and secured as shown above in Figure
9. Then attach the power cable to the push bar (Fig. 10/Item A) using
the cable clips (Fig. 2/Item 18). Now you can select the push bar
height in three steps from 93.5 to 115.5 cm (Figure 7/Item A).
Notice!
The handle height may only be adjusted within the marked range.
•
Press in the long handle and secure in the desired position using
the quick clamping function (Figure 7/Item B)
Warning!
Always set the identical handle height on both sides.
•
Use the cable clips to align the cable in accordance with the long
handle (Figure 10/Item A)
Mounting the grass basket (see Figs. 11 to 13)
First, plug the left (Fig. 2/Item 21) and right (Fig. 2/Item 20) part of
the housing together as shown in Figure 11. Then plug the top part of
the housing (Fig. 2/Item 19) onto the already mounted parts (Figure
12). Before you fi t the grass basket you must ensure that the motor is
Anl_PE_ARM_36_Li_SPK7.indb 290Anl_PE_ARM_36_Li_SPK7.indb 290 07.12.15 13:3707.12.15 13:37
… 290 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pattfield PE-ARM 36 Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pattfield PE-ARM 36 Li in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pattfield PE-ARM 36 Li

Pattfield PE-ARM 36 Li Additional guide - English, German, Dutch, French, Italian, Swedish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info