Manual Pattfield E-EM 1232 (page 27 of 112) (English, German, Dutch, French, Italian, Swedish)

724358

Zoom out

Zoom in

1/112

15. Troubleshooting

Fault Possible causes Remedies

The motor fails to start a) The capacitor is defective a) The mower housing is

clogged Have repaired by

the Customer Service

Center

b) There is no electricity at the plug b) Check the cable and the

fuse

c) The cable is defective c) Check the cable

d) The combined switch/plug is d) Have repaired by the

defective Customer Service Center

e) The connectors have become e) Have repaired by the

separated from the motor Customer Service Center

or the capacitor

f) The mower is standing in high f) Start in low grass or on an

grass area that has already

been mowed; change the

cutting height if necessary

g) The mower housing is clogged g) Clean the housing so that

the blade moves freely

The motor performance drops a) The grass is too high or too damp a) Correct the cutting height

b) The mower housing is clogged b) Clean the housing

c) The blade is severely worn c) Replace the blade

Cutting is irregular a) The blade is worn a) Replace or resharpen the

blade

b) Wrong cutting height b)Correct the cutting height

Important!

For protection, the motor is equipped with a thermal switch which cuts out when the motor is overloaded and

switches on again automatically after a short cooling period.

Anleitung E-EM 1232_SPK7:_ 11.10.2007 9:13 Uhr Seite 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pattfield E-EM 1232 in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 2,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pattfield E-EM 1232 Manual

Product: