Manual Passap Swissknitter (page 31 of 51) (English)

598069

Zoom out

Zoom in

1/51

Decreasing

Decreasing 1 stitch

To decrease one stitch proceed as follows:

m l

Insert the eyelet of the orange tool

into the needle head that holds the

stitch to be decreased.

Pull the needle forward until the

stitch lies behind the open latch.

Push the needle back until the stitch

slips over the closed latch on to the

shaft of the orange tool.

Unhook the orange tool and insert it

into the needle head of the adjacent

needle.

Tilt the orange tool back until the

stitch slips into the new needle head.

Push the empty needle to Non

Working Position*.

Decreasing several stitches/casting off

If you want to decrease several stitches or to cast off, decrease the first stitch as described above, then continue as

follows:

Pull the needle on which there are

now two stitches completely forward

until the stitches slip behind the open

latch needle.

- Wind the yarn that was used for

knitting twice round the needle so

that the thread once lies at the front

and once at the back of the latch.

Pull the needle back until the two

stitches slip over the closed latch

and the yarn to form a new stitch.

Continue to pull the needle back to

make the new stitch slightly larger.

The more you pull the stitch, the

looser the cast off.

Now place the new stitch on to the

adjacent needle, and continue in the

same way until all stitches have been

cast off.

Always push empty needles out of

work to Non Working Position*.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Passap Swissknitter in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Passap Swissknitter Manual

Product: