Manual Passap Swissknitter (page 27 of 51) (English)

598069

Zoom out

Zoom in

1/51

The Sweater

Before you work the neckband, you may wish to press the knitted pieces, in

which case they have to be pinned out to size (i.e. blocked) according to the

measurements given in the block diagram.

Use a steam iron or place a damp cloth over the knitting and leave to dry.

Note: Do not apply any pressure if you use a steam iron.

With right sides facing join one shoulder seam using backstitch.

You can now unravel all the contrast yarn (trimming colour) you have used for

casting on. Very carefully cut the yarn in several places along the last row

worked in contrast yarn and pull up the row until all the stitches have

separated.

Placing the knitting back on to the needles of the

machine for the neckband

Push 108 needles to Working

Position**. Then push every 3rd

needle to Non Working Position*,

i.e. out of work again.

With purl side facing hold the knitting

up against the needles.

Hold it as if you were making a very

small hem.

Using the single decker (orange tool)

pick up a loop on the right-hand side

of the «hem foldline» and place this

loop on to the first needle in Working

Position** at right.

Continue, by always placing a loop

from the knitting on to every needle

in Working Position**.

While doing so, you may slightly

stretch the neck, remembering that

the head has to pass through it.

Knit 26 rows with lock B III

Stitch size 5.

Change to the second colour and

knit about 8 rows in this contrast

yarn.

Release the knitting from the

machine by moving the empty lock

(no feeding eyelets) across the

needles.

♦

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Passap Swissknitter in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Passap Swissknitter Manual

Product: