518739
3
Zoom out
Zoom in
Previous page
1/282
Next page
IDENTIFICATION (WHAT IS WHAT?)
IDENTIFICATION OF SYMBOLS
-- 2 --
Read and understand the Instr-
uction Manual and all warning
labels before using the machine.
Primer Bulb
20
19
18
17
16
15
21
22
14
13
1
7
5
6
11
2
23
3
4
10
12
8
1. Saw chain
2. Guide Bar
3. Spark Arrester Screen
4. Chain Brake Lever / Hand
Guard
5. Front Handle
6. Starter Handle
7. ON/OFF Switch
8. Safety Trigger
9. Rear Handle / Boot Loop
10. Oil Tank cap
11. Fuel Tank Cap
12. Starter Cover
13. Spiked Bumper
14. Bar Retaining Nuts
15. Muffler Shield
16. Spark Plug
17. Air Cleaner Cover
18. Choke Lever for Auto
Choke
19. Primer Bulb
20. Throttle/Trigger
21. Saw Chain Adjustment
Screw
22. Chain Catcher
23. Guide-bar Cover
SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers above to help you locate
the safety feature.
1 LOW KICKBACK SAW CHAIN helps
significantly reduce kickback, or the
intensity of kickback, due to specially
designed depth gauges and guard
links.
3 SPARK ARRESTER SCREEN retains
carbon and other flammable
particles over 0.023 inches (0.6mm)
in size from engine exhaust flow.
Compliance with local, state and
federal laws and/or regulations
governing the use of a spark arrester
screen is the user’s responsi-
bility. See Safety Precautions for
additional information.
4 CHAIN BRAKE LEVER / HAND
GUARD protects the operator’s left
hand in the event it slips off the front
handle while saw is running.
4 CHAIN BRAKE is a safety feature
designed to reduce the possibility of
injury due to kickback by stopping a
moving saw chain in milliseconds. It is
activated by the CHAIN BRAKE lever.
7 STOP SWITCH immediately stops
the engine when tripped. Stop switch
must be pushed to ON position to
start
or restart engine.
8 SAFETY TRIGGER prevents acciden-
tal acceleration of the engine. Throttle
trigger (20) cannot be
squeezed
unless the safety latch is depressed.
22 CHAIN CATCHER reduces the danger
of injury in the event saw chain breaks
or derails during operation. The chain
catcher is designed to intercept a
whipping chain.
9
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Partner P340S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Partner P340S in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info