637598
7
Zoom out
Zoom in
Previous page
1/25
Next page
12 13
GETTING STARTED GETTING STARTED
e. Tighten the screws in a star pattern.
4. Tighten the screws for the panel.
5. Repeat steps 3-6 for the remaining cameras.
SUPPLYING POWER TO THE RIG
You have two options for powering the rig: external power or the
camera batteries.
NOTICE: Do not switch from one power source to another (camera
batteries to external power or external power to camera batteries)
without first powering off the cameras. Failure to follow this guideline can
lead to unexpected powering off, interrupted recordings, and erratic Omni
behavior.
Powering the Rig with External Power
For extended recording time, power the rig with an external power source.
1. Be sure that the battery for the external power unit is charged.
2. Remove the cameras from the rig.
3. Remove the batteries from the cameras.
4. Place the cameras in the rig.
5. Connect the power cable to the power connector.
NOTICE: Do not connect a high-voltage power source to Omni. Omni
requires 5V input, but can be powered using a 12V to 5V step-down
converter, such as the Core SWX / Switronix XP-DV-5GP. The Omni
power connector is a 2.5mm x 5.5mm polarity plug. The step-down
converter has an 8A rating.
Powering the Rig with Camera Batteries + Charging in the Rig
With these options, you can charge the camera batteries without
removing the cameras from the rig.
Using USB cables, connect the camera USB ports to the USB hub
(available with the All Inclusive Omni package).
Use the power connector to connect the external power to the
inner cube.
The camera status lights turn on during charging and turn off when
charging is complete.
Powering the Rig with Camera Batteries + Charging Outside of the Rig
With this option, you must remove the cameras from the rig.
1. Insert the battery into the camera.
2. Connect the camera to a computer, USB hub, or other USB charging
adapter using the included USB cable. The camera status light turns
on during charging and turns off when charging is complete.
When charging with a computer, be sure that the computer is
connected to a power source. If the camera status light does not turn
on, use a different USB port.
For more battery information, see Battery (page 41).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parrot Bebop 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parrot Bebop 2 in the language / languages: German as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parrot Bebop 2

Parrot Bebop 2 User Manual - English - 37 pages

Parrot Bebop 2 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info